×

All ResearchIDs

---

×

All Publications

---

Journal

• An assessment of machining performance of CAPVD-coated carbide tools in face milling of Ti-6Al-4V, By Aditya Kumar, Nitin Tandekar, A. Venu Gopal, and Krishna Valleti , Elsevier, Ceramics International, vol., pp., 2024
• Investigations on inter-splat boundaries of cold sprayed Ni-Cr coatings upon high temperature oxidation, By G. Neelima Devi, A. Venu Gopal, S. Kumar, Elsevier, Surface & Coatings Technology, vol.467, pp., 2023
• Assessing critical process condition for bonding in cold spraying, By G. Neelima Devi, S. Kumar, Tarun Babu M, Gidla Vinay, Naveen M. Chavan, A. Venu Gopal, Elsevier, Surface & Coatings Technology, vol.470, pp., 2023
• Effect of Thermo-mechanical loading on machining induced residual stresses in ultrasonic vibration assisted turning of Ti6Al4V Alloy, By D Venkata Siva Reddy, P. Vamsi Krishna, A. Venu Gopal, SAGE, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.236, pp.1793-1806, 2022
• Influence of inter-splat bonding state of cold spray IN625 and IN718 coatings on mechanical and corrosion performance, By G. Neelima Devi, S. Kumar, T. Sharanya Balaji, Tarun Babu Mangalarapu, S.B. Chandrasekhar, A. Venu Gopal, A. Jyothirmayi, Elsevier, Surface & Coatings Technology, vol.445, pp., 2022
• Experimental Investigation on Flank Wear of the Tool in Ultrasonic Vibration-Assisted Turning of Ti6Al4V Alloy, By D Venkata Siva Reddy, P Vamsi Krishna, A. Venu Gopal, ASTM International, Smart and Sustainable Manufacturing Systems, vol.5, pp., 2021
• Low friction coefficient nanocomposite CrAlSiN/Gradient-CrAlSiCN coatings for high speed/dry machining applications, By Puneet C, Krishna Valleti, A. Venu Gopal, ASME , Journal of Manufacturing Science and Engineering, vol.143, pp., 2021
• Tool-work contact ratio and parametric influence in ultrasonic vibration assisted turning of Ti6Al4V Alloy, By D Venkata Siva Reddy, P Vamsi Krishna, A. Venu Gopal, ASTM International, Journal of Testing and Evaluation, vol.49, pp., 2020
• Determination of constitutive material model constants for Ti6Al4V alloy at near orthogonal machining conditions, By D Venkata Siva Reddy, P Vamsi Krishna, A. Venu Gopal, ASTM International, Materials Performance and Characterization, vol.9, pp.531-548, 2020
• Flexural and impact characterization of wheat flour reinforced epoxy composites treated with saline water, By Archana Yadav, V. K. Srivastava, A Venu Gopal, Elsevier, Materials Today: Proceedings, vol.5, pp.5792-5801, 2018
• Parameter Optimisation in Vibration Assisted Turning of Ti6Al4V Alloy using ANOVA and Grey Relational Analysis, By D. Venkata Sivareddy, P. Vamsi Krishna, A. Venu Gopal and C. L. Prithvi Raz, VUMP Publisher, Int. J. of Automotive and Mechanical Engineering, vol.15, pp.5400-5420, 2018
• CrAlSiN nanocomposite thin films for high-speed machining applications, By Puneet C, Krishna Valleti, A. Venu Gopal, and S. V. Joshi, Taylor & Francis, Materials and Manufacturing Processes, vol.33, pp.371-377, 2018
• Investigation of thermal conductivity and rheological properties of vegetable oil based hybrid nanofluids containing Cu–Zn hybrid nanoparticles, By S. K. Mechiri, V. Vasu, and A. Venu Gopal, Taylor & Francis, Experimental Heat Transfer, vol.30, pp.205-217, 2017
• Experimental Investigation of Graphene Nanoplatelets Based Minimum Quantity Lubrication in Grinding Inconel 718, By R Bhanu Pavan, A Venu Gopal, M Amrita and Bhanu K Goriparthi, SAGE, Proc of IMechE Part B: Journal of Engineering Manufacture, vol., pp.1-11, 2017
• Influence of surface preparation on the tool life of cathodic arc PVD coated twist drills, By Puneet C, Krishna Valleti, A. Venu Gopal, Elsevier, Journal of Manufacturing Processes, vol.27, pp.233-240, 2017
• Rheological study of Cu-Zn Hybrid Newtonian Nanofluids: Experimental data and Modelling using neural network , By Sandeep Kumar Mechiri, Vasu. V and Venu Gopal A, Elsevier, Materials Today: Proceedings , vol.4, pp.1957-1963, 2017
• Thermal Conductivity and Viscosity of Vegetable Oil Based Cu, Zn, and Cu-Zn Hybrid Nanofluids, By M Sandeep Kumar, V Vasu, A Venu Gopal, ASTM International, Journal of Testing and Evaluation, vol.44, pp., 2016
• Thermal conductivity and rheological studies for Cu–Zn hybrid nanofluids with various basefluids, By Sandeep Kumar Mechiri, V Vasu, A Venu Gopal , Elsevier, Journal of the Taiwan Institute of Chemical Engineers, vol.66, pp.321-327, 2016
• Performance evaluation of grinding wheels impregnated with graphene nanoplatelets, By Bhanu Pavan Ravuri, Bhanu Kiran Goriparthi, Rukmini Srikant Revuru, and Venu Gopal Anne, Springer, , Int J Adv Manufacturing Technology, vol.85, pp.2235-2245, 2016
• Studies on Surface Integrity and its Optimization in Turning Ti-6Al-4V, By Satyanarayana Kosaraju, Venu Gopal Anne and N Ravi, Inderscience, Int. J. Precision Technology, vol.5, pp.312-329, 2015
• Thermal Conductivity of Cu-Zn Hybrid Newtonian Nanofluids: Experimental data and modelling using neural network , By Sandeep Kumar Mechiri, Vasu V, Venu Gopal A, Satish Babu R, Elsevier, Procedia Engineering , vol.127, pp.561-567, 2015
• Analysis for Optimal Decisions on Turning Ti6Al4V with Taguchi-Grey Method, By Satyanarayana Kosaraju, Venu Gopal Anne and Bangaru Babu Popuri, SAGE, Part C: Journal of Mechanical Engineering Science, vol.228, pp.152-157, 2014
• Vibration Assisted Conventional and Advanced Machining: A Review, By Maroju Naresh Kumar, Kanmani Subbu S., Vamsi Krishna P., and Venu Gopal A, Elsevier, Procedia Engineering , vol.97, pp.1577-1586, 2014
• Online tool condition monitoring in turning Titanium (Grade 5) using Acoustic Emission: Modeling, By Satyanarayana Kosaraju, Venu Gopal Anne and Bangaru Babu Popuri, Springer, International Journal of Advanced Manufacturing Technology, vol.67, pp.1947-1954, 2013
• Design Optimization of Machining Parameters for Turning Titanium Alloys with Taguchi-Grey Method, By Satyanarayana Kosaraju, Venu Gopal Anne and Bangaru Babu Popuri, Inderscience, Int. J. Machining and Machinability of Materials, vol.13, pp.191-202, 2013
• Optimal machining conditions for turning Ti-6Al-4V using response surface methodology, By Satyanarayana Kosaraju, Venu Gopal Anne, Springer, Advances in Manufacturing, vol.1, pp.329-339, 2013
• Experimental Investigations and Modeling of Machining Titanium Alloy Ti-6Al-4V, By Satyanarayana Kosaraju, Venu Gopal Anne, and Bangaru Babu Popuri, Scientific, Journal of Applied Mechanics and materials, vol.315, pp.562-566, 2013
• Studies on the Effect of Approach Angle and Process Parameters in Face Milling, By Sadasiva Rao T, Satyanarayana K, Praneeth Y, and Venu Gopal A, Scientific, Journal of Applied Mechanics and Materials, vol.110-116, pp.3147-3155, 2012
• Prediction of Vehicle Reliability using ANN, By Hari Prasad, P. Bhattacharjee and A. Venu Gopal, Totem, International Journal of Performability Engineering, vol.8, pp.321-329, 2012
• Taguchi analysis on cutting forces and temperature in turning Titanium Ti-6Al-4V, By Satyanarayana Kosaraju, Venu Gopal Anne and Bangaru Babu Popuri, Intersience, International Journal of Mechanical and Industrial Engineering, vol.2, pp.59-63, 2012
• Error Compensation of freeform surfaces using Reverse Engineering Technique, By V. Vinod Kumar, G.R.N. Tagore, A. Venu Gopal, Open Access Journal, Int. J. of Material Processing and Characterization, vol.1, pp.136-141, 2012
• Some Investigations on Geometric Conformity Analysis of 3-D Freeform Objects Produced by Rapid Prototyping (FDM) Process, By V Vinod Kumar, GRN Tagore, and A. Venu Gopal, Interscience, Int. Journal of Applied Research in Mechanical Engineering, vol.1, pp.201-205, 2012
• Multi-Objective Optimization of Electrochemical machining of EN31 steel by Grey Relational Analysis, By Chakradhar and A. Venu Gopal, IACSIT Press, International Journal of Modeling and Optimization, vol.1, pp.113-117, 2011
• Optimization of Turning Process using Grey Relational Analysis and Utility Concept based on Taguchi Method, By G. Srinivasa Rao and A. Venu Gopal, SERIALS Publication, Journal of Modern Manufacturing Technology, vol.1, pp.93-104, 2009
• A New Chip Thickness Model for Performance Assessment of Silicon Carbide Grinding, By A. Venu Gopal and P. Venkateswara Rao, Springer, International Journal of Advanced Manufacturing Technology, vol.24, pp.816-820, 2004
• Performance Improvement of Grinding of SiC using Graphite as Solid Lubricant, By A. Venu Gopal and P. Venkateswara Rao, Taylor & Francis, Int. J. of Materials and Manufacturing Processes, vol.19, pp.177-186, 2004
• Selection of Optimum Conditions for Maximum Material Removal Rate with Surface Finish and Damage as Constraints in SiC Grinding, By A. Venu Gopal and P. Venkateswara Rao, Elsevier, International Journal of Machine Tools and Manufacture, vol.43, pp.1327-1336, 2003
• The Optimization of Grinding of Silicon Carbide with Diamond Wheels using Genetic Algorithms, By A. Venu Gopal and P. Venkateswara Rao, Springer, International Journal of Advanced Manufacturing Technology, vol.22, pp.475-480, 2003
• Modelling of Grinding of Silicon Carbide with Diamond Wheels, By A. Venu Gopal and P. Venkateswara Rao, Taylor & Francis, Mineral Processing and Extractive Metallurgy Review, vol.23, pp.51-63, 2002

Conference

• Correlation of In-flight Powder energy with Inter-splat Bonding in Cold Sprayed Coatings By G Neelima Devi, A. Venu Gopal and S. Kumar, Asian Thermal Spray Conference & Expo 2023 (ATSC-2023), 2023
• An approach for intermittent cutting force signal analysis in single-insert face milling By Venu Gopal Anne, Srinivasa Rohit V, 3rd International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2023), 2023
• Effect of Feedstock State on the Corrosion Performance of Cold Sprayed Nickel Coatings By G Neelima Devi, A. Venu Gopal and S. Kumar, National Symposium on Electrochemical Science and Technology [NSEST- 2023], 2023
• Cold Spraying: An Emerging Technique for Additive Manufacturing and Near Net Shaping By G Neelima Devi, A. Venu Gopal and S. Kumar, IIM-ATM 2022, 2022
• Tailoring Cold Spray Process for a Successful Deposition of Temperature Sensitive Materials By G Neelima Devi, A. Venu Gopal and S. Kumar, International Conference and Exhibition on Materials, Engineering, Technology and Advances in Heat Treatment (MET+HTS-2022), 2022
• Optimization of Machining Parameters for Vibration Assisted Turning of Ti6Al4V Alloy Using Analysis of Variance By D. Venkata Sivareddy, P.Vamsi Krishna, A. Venu Gopal, International Conference on. Applied Mechanical Engineering Research (ICAMER 2019), 2019
• Development of Novel Gradient C-CrAlSiN Based Cathodic Arc PVD Coatings for High Speed/dry Machining Applications By Puneet C, Krishna Valleti, A Venu Gopal, International Conference on Metallurgical Coatings & Thin Films, ICMCTF – 2018, 2018
• Effect of Johnson cook material constants on the prediction of stresses and forces in Vibration Assisted Turning of Ti6Al4V Alloy By D Venkata Sivareddy, A Venu Gopal, P Vamsi Krishna, M Naresh Kumar, ICMTS-2017, 2017
• Influence of Tool Geometry on Residual Stresses in Vibration Assisted Turning of Ti6Al4V Alloy By D Venkata Sivareddy, P Vamsi Krishna, A Venu Gopa, COPEN-2017, 2017
• Investigation on the influence of hybrid nanofluid/MQL on cutting forces in turning Inconel-718al data and modeling using neural network By M Sandeep Kumar, V Vasu, A Venu Gopal, 6th International & 27th AIMTDR Conference, 2016
• CrAlSiN nanocomposite thin films for cutting tool applications, National Conference on Advances in Materials Processing and Characterization By Puneet C, Krishna Valleti, A Venu Gopal, National conference on advances in materials processing and characterization, NCAMPC – 2016, 2016
• Development of CrAlN-Si3N4/DLC based cathodic arc PVD coatings for high speed/dry machining applications By Puneet C, Krishna Valleti, A Venu Gopal, International Conference on Nanoscience, Nanotechnology & Advanced Materials, NANOS – 2015, 2015
• HSS Tool Wear Mechanism in Machining of HTBP based Composite Propellant Grain By Kishore Kumar Katikani, Vanapalli Srinivasa Rohit, A Venu Gopal, and V.V. Rao, 5th International and 26th AIMTDR Conference , 2014
• Investigations on Grinding of Inconel 718 using Newly Developed Graphene Nano Platelets Impregnated Grinding Wheels By Bhanu Pavan, G. Bhanu Kiran, R.R. Srikant and A. Venu Gopal, 5th International and 26th AIMTDR Conference 2014, 2014
• Surface Integrity and Optimization in Turning Ti6Al4V By K. Ravi. N, Shivaji Babu K and Venu Gopal A, 5th International and 26th AIMTDR Conference 2014, 2014
• Finite Element Simulation of Cutting Forces in Turning Ti6Al4V using DEFORM3D By Satyanarayana Kosaraju, Venu Gopal A and Bangaru Babu Popuri, International Mechanical Engineering Congress and Exposition, IMECE2013, 2013
• Experimental Studies on the Effect of Rake Angle on Main Cutting Force and Surface Roughness in Machining Ti-6Al-4V By Satyanarayana Kosaraju, Venu Gopal A, and Bangaru Babu Popuri, 2nd International Conference on Advanced Manufacturing and Automation (INCAMA 2013, 2013
• Three-dimensional numerical simulation of cutting force in turning Ti6Al4V By Satyanarayana K., Venu Gopal A, Bangaru Babu P, International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 8, 2013), 2013
• Experimental Investigations and Modeling of Machining Titanium Alloy Ti-6Al-4V By Satyanarayana Kosaraju, Venu Gopal A and Bangaru Babu Popuri, 3rd International Conference on Mechanical and Manufacturing Engineering (ICME2012), 2012
• Online Tool Wear Monitoring using Cutting Forces in Turning Ti-6Al-4V By Satyanarayana Kosaraju, Venu Gopal A, and Bangaru Babu Popuri, International Conference on Trends in Industrial and Mechanical Engineering (ICTIME 2012), 2012
• Effect of Rake Angle and Feed Rate on Cutting Forces in an Orthogonal Turning Process By Satyanarayana Kosaraju, Venu Gopal A, and Venkateswara Rao Ghanta, International Conference on Trends in Mechanical and Industrial Engineering (ICTMIE 2011), 2011
• Parametric Optimization in Electrochemical Machining of Inconel 625 Alloy based on Grey Relation Approach By A. Venu Gopal and Chakradhar D, 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), 2011
• Online Tool Condition Monitoring in Face Milling Operation using Acoustic Emission By Manohar Goud K, Satyanarayana K, Sadasiva Rao T, and Venu Gopal A, 3rd International & 24th AIMTDR Conference, 2010
• Experimental Study and Parameter Design of Electrochemical Machining of EN-31 Steel using Taguchi Method By Chakradhar and A. Venu Gopal, 3rd International & 24th AIMTDR Conference, 2010
• Evaluation of minimum zone circularity error from coordinate data of rapid prototyping parts using genetic algorithms By G.R.N. Tagore, V. Vinod Kumar, A. Venu Gopal, 3rd International & 24th AIMTDR Conference, 2010
• Design and Optimization of Process Parameters in Electrochemical Machining of Inconel 625 Alloy using Taguchi Method By A. Venu Gopal and D. Chakradhar, 16th International Symposium on Electromachining (ISEM-XVI), 2010
• A review on Rapid Product Development via Rapid Prototyping By V. Vinod Kumar, G.R.N. Tagore, A. Venu Gopal, National Conference on Advanced Materials & Processing, 2007
• Form accuracy analysis of cylindrical parts produced by rapid prototyping By G.R.N. Tagore, Swapnil D. Anjikar and A. Venu Gopal, International Solid Freeform Fabrication Symposium, 2007
• Multi-Objective Optimization of Build Orientation for Rapid Prototyping with Fused Deposition Modeling (FDM) By GRN Tagore, Swapnil D Anjikar, and A. Venu Gopal, International Solid Freeform Fabrication Symposium, 2007
• Surface Roughness Evaluation of Rapid Prototyping Models, Solid Freeform Fabrication Proceedings By Swapnil D Anjikar, GRN Tagore, and A. Venu Gopal, International Solid Freeform Fabrication Symposium, 2007
• Evaluation of Circularity Error by Minimum Zone Method using Minimax Criterion By Karanam Jaya Krishna, G. Srihari and A. Venu Gopal, Global Congress on Manufacturing and Management (GCMM-2006), 2006
• Finite Element Simulation of Orthogonal Metal Cutting using DEFORM 2D By PK Srinivasa Rao, G. Venkateswara Rao, and A. Venu Gopal, National Conference on State-of-the-art Technologies in Mechanical Engineering, 2006
• Finite Element Modeling and Analysis of Orthogonal Metal Cutting By Srinivasa Rao PK, Venkateswara Rao G, and Venu Gopal A, 1st International, and 22nd AIMTDR Conference, 2006
• Precision Machining - Ceramic Grinding: A Review By P Venkateswara Rao and A. Venu Gopal, 3rd SERC School on Precision Engineering, 2002
• Assessment of Ceramic Grinding Process on the Basis of Surface Roughness and Grinding Damage By A. Venu Gopal and P. Venkateswara Rao, 7th International Conference on Manufacturing, PCM 2002, 2002
• Influence of Grinding Parameters on Surface Finish and Damage of Ground Silicon Carbide By A. Venu Gopal and P. Venkateswara Rao, 20th AIMTDR Conference, 2002
• Recent Advances in Ceramic Grinding By A. Venu Gopal and P. Venkateswara Rao, Symposium on Manufacturing Excellence, 2002
• A New Chip Thickness Model for Performance Assessment of Grinding Process By Mandeep Kumawat, A. Venu Gopal and P. Venkateswara Rao, 17th International Conference on Computer Aided Production Engineering - (CAPE-2001), 2001
• Life Testing of M2 & M42 End Mills while Machining C-45 Steel & Cast Iron By A. Venu Gopal, R.L. Murty and G.V. Rao, XV AIMTDR Conference, 1992
• Computer Aided Design and Manufacture of High Precision Plate CAMs By C.S.P. Rao, A. Venu Gopal, R.L. Murty, and G. Srihari, XV AIMTDR Conference, 1992
• Software for the Generation of Part Program for Machining Plate CAMs By A. Venu Gopal, C.S.P. Rao, and R.L. Murty, AMSE-91 International Conference, 1991

Educational Package

• Engineering Drawing By Prof. A. Venu Gopal, Sri G. Venkateswara Rao and Dr. V. Hari Kumar, 2013

Patent

• A MILLING CUTTING TOOL (344528)

×

Previous Students

---