Information
Key Notes
- Journal(s): 102
- Conference(s): 54
- Book Chapter(s): 3
- Text Book(s): 2
- PhD: Current - 4 Awarded - 7
- Event(s) Organized: Conference - 1 Workshop - 2 FDP - 1 GIAN - 0
161
PUBLICATIONS11
DOCTORAL STUDENTS5
PROJECTS1
PATENTResearch Areas
• Composite Materials
• Modeling and Simulation of Manufacturing Processes
• Nano cutting fluids in machining
• Solid lubricants in machining process
• Vibration Assisted Machining
EDUCATION QUALIFICATION
| Degree | Institute | Year |
|---|---|---|
| Doctor of Philosophy | Andhra University | 2009 |
| Master of Technology | S V University | 2003 |
| Bachelor of Technology | S V University | 2000 |
COURSES HANDLED
| Course | L-T-P | Credit | Degree Level |
|---|---|---|---|
| Management Science and Productivity(ME305) | 3-0-0 | 3 | UG |
| Precision Engineering(ME26021) | 3-0-0 | 3 | PG |
| Machining Science(ME352) | 3-0-0 | 3 | UG |
| Machine Tools and Metrology(ME302) | 3-0-0 | 3 | UG |
| Manufacturing Science(ME251) | 3-0-0 | 3 | UG |
| Design and Analysis of Machine Tools(ME5202) | 3-0-0 | 3 | PG |
| Precision Engineering(ME5252) | 3-0-0 | 3 | PG |
RESEARCH IDs
ORC ID
SCOPUS ID
Google Scholar ID
PUBLICATIONS
Journal(s)
Finite Element Analysis of Anterior Implant Supported Restorations with Different CAD-CAM Restorative Materials,
By Usanee Puengpaiboon, Nichapat Rattanapan, Vamsi Krishna Pasam and Chamaiporn Sukjamsri,
Georg Thieme Verlag KG,
European Journal of Dentistry,
vol.19(1) ,
pp.37-47,
2025
Evaluation of optimum process parameters based on specific cutting energy in turning for sustainability,
By Rukmini Srikant Revuru, Kethavath Tejasvi Sanjay, Banoth Srinu, Pasam Vamsi Krishna,
Springer,
The International Journal of Advanced Manufacturing Technology,
vol.136,
pp.4569–4579,
2025
Effect of Tool Rotational Speed and Feed Rate on the Mechanical Properties of Dissimilar Friction Stir Welded AZ31 and ZE41 Magnesium Alloys,
By Pradeep Kumar Prathipati and Vamsi Krishna Pasam,
Taylor & Francis,
Canadian Metallurgical Quarterly,
vol.,
pp.1-18,
2025
Constitutive thermo-mechanical model for parametric analysis in vibration assisted turning of Inconel 718,
By Banoth Srinu, Vamsi Krishna Pasam, Anne Venu Gopal,
Springer,
Journal of Materials Engineering and Performance,
vol.,
pp.,
2025
FE modelling of multi-grit stochastic grinding tool for vibration assisted surface grinding of Ti6Al4V,
By Naresh Kumar Maroju, and Vamsi Krishna Pasam,
Springer,
Journal of Materials Engineering and Performance,
vol.34,
pp.11185–11197,
2025
Thermo-mechanical modelling and simulation of Ti-6Al-4V machining with CO2 cooling,
By Banoth Srinu, Naresh Kumar Maroju, Srimanthula Srikanth, Vamsi Krishna Pasam, and Anne Venu Gopal,
Springer,
Arabian Journal for Science and Engineering,
vol.,
pp.,
2025
Enhancing Tribological and Corrosion Performance of SLM-Printed AlSi12Mg Components through Ultrasonic Assisted Magnetic Abrasive Finishing,
By Raju Maraboina and P. Vamsi Krishna,
Inderscience Enterprises Ltd,
International Journal of Surface Science and Engineering,
vol.19 (1),
pp.4-21,
2025
Parametric Analysis for Ultrasonic-Assisted Magnetic Abrasive Finishing of AlSi12Mg Alloy Fabricated through Selective Laser Melting,
By Maraboina Raju, Mehdi Tlija, Jaber Abu Qudeiri, Vamsi Krishna Pasam, Venkatesh Gudipadu, Vishal Naranje,
Springer,
Materials Engineering and Performance,
vol.34,
pp.20181–20196,
2025
Influence of residual stress on the fatigue life of Ti6Al4V alloy machined through ultrasonic assisted turning,
By G. Kartheek, D Venkata Sivareddy, Sainadh and P Vamsi Krishna,
Springer,
Journal of Materials Engineering and Performance,
vol.,
pp.,
2025
Surface Integrity Tool Wear and Chip Morphology Studies in Spot Cooled Vibration Assisted Turning of Ti6Al4V Alloy,
By G. Kartheek, Mehdi Tlija, Jaber Abu Qudeiri, Vamsi Krishna Pasam, Venkatesh Gudipadu, and Vishal Naranje,
Springer,
Journal of Materials Engineering and Performance,
vol.34,
pp.7702-7711,
2025
CFD aided Finite Element Modeling for Spot Cooled Vibration Assisted Turning of Ti6Al4V alloy,
By G. Kartheek and P. Vamsi Krishna,
Taylor & Francis,
Machining Science and Technology,
vol.28(5) ,
pp.836-865,
2024
Enhancing Surface Integrity of Selective Laser Melted Al-Si Alloys through Ultrasonic Assisted Magnetic Abrasive Finishing utilizing SiC Abrasives,
By Raju Maraboina and P. Vamsi Krishna,
Springer,
Silicon,
vol.16,
pp.1183–1196,
2024
Two-dimensional hexagonal boron nitride powder by cryo-milling: Morphology and oxidation behavior at elevated temperature,
By Sreedhara Sudhakara Sarma, Balaji Padya, B.V. Sarada, Vasamsetti Akhila, Chandra Gowthami, Pasam Vamsi Krishna, and Joydip Joardar,
Springer,
Journal of Nanoparticle Research,
vol.26,
pp.80,
2024
Analysis of Residual Stresses in Spot Cooled Vibration Assisted Turning of Ti6Al4V Alloy using Computational Fluid Dynamics-Aided Finite Element Method,
By G. Kartheek and P. Vamsi Krishna,
Springer,
Journal of Materials Engineering and Performance,
vol.33,
pp.3731–3745,
2024
Analyzing the Effect of Elliptical Vibration Assistance in Machining of Zr-based BMG,
By Naresh Kumar Maroju, Xiaoliang Jin and Vamsi Krishna Pasam,
Elsevier,
Journal of Manufacturing Processes,
vol.119,
pp.156–168,
2024
Performance evaluation of Spot Cooled Vibration Assisted Turning for Ti6Al4V alloy,
By G. Kartheek and P. Vamsi Krishna,
Sage,
Proceedings of Institute of Mechanical Engineers, part-B: Journal of Engineering Manufacture,
vol.238(1-2),
pp.235–248,
2024
Surface integrity and chip morphology in Ti-6Al-4V machining under CO2 cooling with Vortex Tube,
By Khirod Kumar, and P. Vamsi Krishna,
Inderscience Enterprises Ltd,
International Journal of Surface Science and Engineering,
vol.17(3),
pp.165-179. ,
2023
A numerical investigation on coolant flow and heat transfer characteristics of cutting tool in spot cooled vibration assisted turning of Ti6Al4V alloy,
By G. Kartheek, P. Vamsi Krishna and Prashanth Kumar Lam,
Elsevier,
International Journal of Thermal Sciences,
vol.191,
pp.1-17,
2023
Multi Objective Parametric Optimization of Ultrasonic Vibration Assisted Turning on TI6AL4V Alloy,
By Vamsi Krishna Pasam, Gamidi Kartheek, Suryachandra Rankireddy and Lingaraju Dumpala,
Trans Tech Publications,
Materials Science Forum,
vol.1097,
pp.11-16,
2023
Feasibility study of CO2 based Vortex Tube Cooling System in turning of Ti-6Al-4V,
By Khirod Kumar, and P. Vamsi Krishna,
ASTM,
Smart and Sustainable Manufacturing Systems,
vol.7(1),
pp.1-13,
2023
Machinability study in turning of Ti-6Al-4V using CO2 based vortex tube cooling system,
By Khirod Kumar, and P. Vamsi Krishna,
The Automotive Engineering Centre (AEC), Universiti Malaysia Pahang,
International Journal of Automotive and Mechanical Engineering,
vol.20(1),
pp.10298-10306,
2023
Experimental investigation on the two body abrasive wear of AA6061-SiC-Gr nano and hybrid nanocomposites,
By Virinchi Krishna Lagisetti, A Prasad Reddy, and P Vamsi Krishna,
Sage,
Proceedings of Institute of Mechanical Engineers, part-J: Journal of Engineering Tribology,
vol.237(5),
pp.1027-1041,
2023
Design and analysis of different horn profiles using FEM for vibration assisted machining, Multiscale and Multidisciplinary Modeling Experiments and Design,
By G. Kartheek and P. Vamsi Krishna,
Springer,
Multiscale and Multidisciplinary Modeling, Experiments and Design,
vol.5,
pp.135-155,
2022
Dry sliding wear study on AA6061/SiCp nano and AA6061/SiCp/Gr hybrid nanocomposites,
By Virinchi Krishna Lagisetti, A Prasad Reddy and P Vamsi Krishna,
Springer,
Silicon,
vol.14,
pp.12235-12250,
2022
Effect of thermo-mechanical loading on machining induced residual stresses in ultrasonic vibration assisted turning of Ti6Al4V alloy,
By D Venkata Sivareddy, P Vamsi Krishna, and A Venu Gopal,
Sage,
Proceedings of Institute of Mechanical Engineers, part-B: Journal of Engineering Manufacture,
vol.236(13),
pp.1793-1806,
2022
Influence of flow parameters in dual nozzle CO2 based vortex tube cooling system during turning of Ti-6Al-4V,
By Khirod Kumar, and P.Vamsi Krishna,
Sage,
Proceedings of Institute of Mechanical Engineers, part-C: Journal of Mechanical Engineering Science,
vol.236(9),
pp.4828-4842,
2022
Design and analysis of different horn profiles using FEM for vibration assisted machining,
By G. Kartheek and P. Vamsi Krishna,
Springer ,
Multiscale and Multidisciplinary Modeling Experiments and Design,
vol.5,
pp.135-155,
2022
Residual stress evaluation using finite element modeling in turning of Ti6Al4V and its optimization using RSM,
By 15. Vashisht Kant, G. Kartheek, Chamaiporn Sukjamsri, and P. Vamsi Krishna,
ASTM,
Smart and Sustainable Manufacturing Systems,
vol.6(1),
pp.,
2022
Machinability study on AA6061/2SiC/Graphite hybrid nanocomposites fabricated through ultrasonic assisted stir casting,
By Virinchi Krishna Lagisetti, Prasad Reddy A, Chamaiporn Sukjamsri and Vamsi Krishna P,
The Automotive Engineering Centre (AEC), Universiti Malaysia Pahang,
International Journal of Automotive and Mechanical Engineering,
vol.19 (3),
pp.9950 – 9963,
2022
Experimental investigation to study the performance of CNT/MoS2 Hybrid nanofluid in Turning of AISI1040 steel,
By Srinu Gugulothu, Vamsi Krishna Pasam,
Taylor and Francis Ltd.,
Australian Journal of Mechanical Engineering,
vol.20(3),
pp.814-824,
2022
Residual Stress Evaluation Using Finite Element Modeling in Turning of Ti-6Al-4V and Its Optimization Using RSM,
By Vashisht Kant, G. Kartheek, Chamaiporn Sukjamsri, and P. Vamsi Krishna,
ASTM International,
Smart and Sustainable Manufacturing Systems,
vol.6(1),
pp.247-261,
2022
Design of Co2 Based Cooling System For Machining of Ti-6al-4v Using Joule Thomson Effect,
By Khirod Kumar, Gaurav Mahendra , Abhishek Markandeya, and P.Vamsi Krishna,
ASTM,
Smart and Sustainable Manufacturing Systems,
vol.5(1),
pp.47-64,
2021
Tool-work Contact Ratio and Parametric Influence in Ultrasonic Vibration Assisted Turning of Ti6Al4V Alloy,
By D Venkata Sivareddy, P Vamsi Krishna, and A Venu Gopal,
ASTM,
Journal of Testing and Evaluation,
vol.49(5),
pp.3035-3056,
2021
Numerical Simulation of Friction Stir Welding Process to Investigate the Temperature Distribution in AA7020,
By Meenakshi Devi Parre, T Krishna Murthy, Krishnanand Lanka and P Vamsi Krishna,
MechAero Foundation for Technical Research and Education Excellence (MAFTREE),
The International Journal of Vehicle Structures and Systems,
vol.13(5),
pp.634-638,
2021
Parametric influence on residual stresses in VAT,
By Sanjay Krishna Vihari R, Kartheek Gamidi, and Vamsi Krishna P,
Elsevier,
Materials Today: Proceedings,
vol.46,
pp.8056-8060,
2021
Experimental Investigation on Flank Wear of the Tool in Ultrasonic Vibration Assisted Turning of Ti6Al4V Alloy,
By D Venkata Sivareddy, P Vamsi Krishna, and A Venu Gopal,
ASTM,
Smart and Sustainable Manufacturing Systems,
vol.5(1),
pp.101-112,
2021
Modelling and simulation of nanofluids to study cooling and lubrication effect,
By Neelam Parimala, Gaurav Mahendra and P. Vamsi Krishna,
Elsevier,
Materials Today: Proceedings,
vol.22(4),
pp.2941-2949,
2020
Testing and Performance Evaluation of Vegetable Oil Based Hybrid Nano cutting fluids,
By Srinu Gugulothu and P Vamsi Krishna,
ASTM,
Journal of Testing and Evaluation,
vol.48(5),
pp.3839-3854,
2020
Modelling and Simulation of Friction Stir Welding and Under Water Friction Stir Welding of Al6063 Alloy,
By P. Vamsi Krishna, Amol Balasaheb Jaware and R. R. Srikant,
Horizon Research Publishing,
Universal Journal of Mechanical Engineering ,
vol.8(2),
pp.67-83,
2020
Testing of nanofluids and its machining performance evaluation,
By P Vamsi Krishna, R R Srikant and N Parimala,
ASTM,
Materials Performance and Characterization,
vol. 9(1),
pp.173-189,
2020
Effect of vegetable oil based hybrid nano cutting fluids on surface integrity of titanium alloy in machining process,
By P Vamsi Krishna, and N Parimala,
ASTM,
Smart and Sustainable Manufacturing Systems,
vol.4(1),
pp.1-18,
2020
Performance study of CO2 based vortex tube cooling system in turning of Ti-6Al-4V,
By Khirod Kumar, and P.Vamsi Krishna,
ASTM,
Smart and Sustainable Manufacturing Systems,
vol.4(1),
pp.62-80,
2020
Determination of Constitutive Material Model Constants for Ti6Al4V Alloy at near Orthogonal Machining Conditions,
By D Venkata Sivareddy, P Vamsi Krishna, and A Venu Gopal,
ASTM,
Materials Performance and Characterization,
vol.9(1),
pp.531-548,
2020
Laser Additive Manufacturing of Hastelloy-X Thin Walls using Directed Energy Deposition: Parametric Investigation and Multi-Objective Analysis,
By A N Jinoop, C P Paul, J Denny, S K Nayak, P Vamsi Krishna, K S Bindra,
Old City Publishing,
Lasers in Engineering,
vol.46(1-4),
pp.15-34,
2020
Mechanical and wear properties of aluminum-based nanocomposites fabricated through ultrasonic assisted stir casting,
By A Prasad Reddy, P Vamsi Krishna and R N Rao,
ASTM,
Journal of Testing and Evaluation,
vol.48(4),
pp.3035-3056,
2020
Performance evaluation of CNT/MoS2 hybrid nanofluid for Surface roughness in machining,
By Srinu Gugulothu, Vamsi Krishna Pasam,
The Automotive Engineering Centre (AEC), Universiti Malaysia Pahang,
International Journal of Automotive and Mechanical Engineering,
vol.16(4),
pp.7413-7429,
2019
Optimizing multi-response parameters in turning of AISI1040 steel using Desirability approach,
By Srinu Gugulothu, Vamsi Krishna Pasam,
Ram Arti Publishers,
International Journal of Mathematical, Engineering and Management Sciences,
vol.4(4),
pp.905-921,
2019
Strengthening and mechanical properties of SiC and graphite reinforced Al6061 hybrid nanocomposites processed through ultrasonically assisted casting technique,,
By A Prasad Reddy, P Vamsi Krishna, R N Rao,
Springer ,
Transactions of the Indian Institute of Metals,
vol.72(9),
pp.2533–2546,
2019
FE Modeling and Experimental Analysis of Residual Stresses in Vibration Assisted Turning of Ti6Al4V,
By M. Naresh Kumar, and P Vamsi Krishna,
Springer ,
International Journal of Precision Engineering and Manufacturing,
vol.20,
pp.417-425,
2019
Tribological behaviour of Al6061-2SiC-xGr hybrid metal matrix nanocomposites fabricated through ultrasonically assisted stir casting technique,
By A Prasad Reddy, P Vamsi Krishna, R N Rao,
Springer,
Silicon,
vol.11,
pp.2853–2871,
2019
Two body abrasive wear behaviour of AA6061-2SiC-2GR hybrid nanocomposite fabricated through ultrasonically assisted stir casting,
By A Prasad Reddy, P Vamsi Krishna, R N Rao,
Sage,
Journal of Composite Materials,
vol.53(15),
pp.2165–2180,
2019
Influence of Green Nanocutting Fluids on Machining Performance Using Minimum Quantity Lubrication Technique,
By 38. R. Padmini, P. V. Krishna, S. Mahith and B. S. Kumar,
Elsevier ,
Materials Today: Proceedings,
vol.18,
pp.1435-1449,
2019
Analysis of Low Pressure Die Casting of Aluminium Alloy Wheels Using Taguchi Technique,
By G. Kartheek, Khirod Kumar Mahapatro, Vaibhav Singhal and P. Vamsi Krishna,
JournalPub,
International Journal of Mechanical Handling and Automation,
vol.5(2),
pp.8–18,
2019
Characterization of vegetable oil based nano cutting fluids,
By P Vamsi Krishna, R R Srikant and R Padmini,
ASTM,
Journal of Testing and Evaluation,
vol.47(2),
pp.825-837,
2019
Development of Finite Element Based Model For Performance Evaluation of Nano Cutting Fluids In Minimum Quantity Lubrication,
By R R Srikant, P Vamsi Krishna, Syed Ismail and Uday Kumar,
Elsevier ,
CIRP Journal of Manufacturing Science and Technology,
vol.21,
pp.75–85,
2018
Parameter Optimisation in Vibration Assisted Turning of Ti6Al4V Alloy using ANOVA and Grey Relational Analysis,
By D Venkata Sivareddy, P Vamsi Krishna, A Venu Gopal and C.L. Prithvi Raz,
The Automotive Engineering Centre (AEC), Universiti Malaysia Pahang,
International Journal of Automotive and Mechanical Engineering,
vol.15 (3),
pp.5400-5420,
2018
Experimental Investigation on Properties and Machining Performance of CNT Suspended Vegetable oil Nanofluids,
By P Vamsi Krishna, R R Srikant and N Parimala,
The Automotive Engineering Centre (AEC), Universiti Malaysia Pahang,
International Journal of Automotive and Mechanical Engineering,
vol.15 (4),
pp.5957-5975,
2018
Comparing the performance & viability of nano and microfluids in minimum quantity lubrication for machining AISI1040 steel,
By Vamsi Krishna Pasam, Rukmini Srikant Revuru, Srinu Gugulothu,
Elsevier ,
Materials Today: Proceedings,
vol.5,
pp.8016–8024,
2018
Performance evaluation of vegetable oil based nano cutting fluids in machining using Grey Relational Analysis-A step towards sustainable manufacturing,
By R Padmini, P Vamsi Krishna, G. Krishna Mohana Rao and R R Srikant,
Elsevier ,
Journal of Cleaner Production,
vol.172,
pp.2862-2875,
2018
Investigations on Feasibility of Low Frequency Vibration Assisted Turning,
By M. Naresh Kumar, P Vamsi Krishna and Xiaoliang Jin,
Springer,
Int. J. of Advanced Manufacturing Technology,
vol.91(9-12),
pp.3775-3788,
2017
Assessment of high and low frequency vibration assisted turning with material hardness,
By Naresh Kumar Maroju, P Vamsi Krishna and Xiaoliang Jin,
Inderscience Enterprises Ltd,
Int. J. Machining and Machinability of Materials,
vol.19(2),
pp.110-135,
2017
Silicon Carbide Reinforced Aluminium Metal Matrix Nano Composites-A Review,
By A P Reddy, P V Krishna, R N Rao, N V Murthy,
Elsevier ,
Materials Today: Proceedings,
vol.4,
pp.3959-3971,
2017
Dry sliding wear behaviour of ultrasonically-processed AA6061/SiCp nanocomposites,
By A Prasad Reddy, P Vamsi Krishna and R N Rao,
The Automotive Engineering Centre (AEC), Universiti Malaysia Pahang,
International Journal of Automotive and Mechanical Engineering,
vol.14 (4),
pp.4747-4768,
2017
Optimization Of Turning AISI 1040 Steel With Extreme Pressure Additive In Vegetable Oil Based Cutting Fluids,
By B. Satheesh Kumar, G. Padmanabhan, P. Vamsi Krishna,
The Automotive Engineering Centre (AEC), Universiti Malaysia Pahang,
International Journal of Automotive and Mechanical Engineering,
vol.14(2),
pp.4285-4297,
2017
Al/SiCNP and Al/ SiCNP/X nanocomposites: fabrication and properties - A Review,
By A Prasad Reddy, P Vamsi Krishna and R N Rao,
Sage,
Journal of Nanomaterials Nanoengineering and Nanosystems,
vol.231(4),
pp.155-172,
2017
Multi Response Optimization for Turning AISI 1040 Steel with Extreme Pressure Additive included Vegetable Oil Based Cutting Fluids using Grey Relational Analysis,
By B. Satheesh Kumar, G. Padmanabhan, P. Vamsi Krishna,
Elsevier ,
Journal of Advanced Research in Materials Science,
vol.23 (1),
pp.1-14,
2016
Experimental evaluation of nano molybdenum di sulphide and nano boric acid suspensions in vegetable oils as prospective cutting fluids during turning of AISI 1040 steel,
By R Padmini, P Vamsi Krishna and G. Krishna Mohana Rao,
Sage,
Proceedings of Institute of Mechanical Engineers, part-J: Journal of Engineering Tribology,
vol.230(5),
pp.493-505,
2016
Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel,
By R Padmini, P Vamsi Krishna and G. Krishna Mohana Rao,
Elsevier,
Tribology International,
vol.94,
pp.490–501,
2016
Effect of austempering and martempering on the properties of AISI 52100 steel,
By P Vamsi Krishna, R R Srikant, Mustafa and N Sriram,
ISRN Tribology,
International Scholarly research Network ISRN Tribology,
vol.,
pp.1-6,
2016
Evaluation of Vegetable Oil Based Cutting Fluids with Extreme Pressure Additive in Turning AISI 1040 Steel Using Taguchi Method,
By B. Satheesh Kumar, G. Padmanabhan, P. Vamsi Krishna,
Central Manufacturing Technology Institute,
Manufacturing Technology Today,
vol.15 (9),
pp.15-21,
2016
Performance Assessment of Vegetable Oil based Cutting Fluids with Extreme Pressure Additive in Machining,
By B. Satheesh Kumar, G. Padmanabhan, P. Vamsi Krishna,
Elsevier ,
Journal of Advanced Research in Materials Science,
vol.19 (1),
pp.1-13,
2016
Development and performance evaluation of self-lubricating drill tools,
By 57. R R Srikant, VSNV Ramana and P Vamsi Krishna,
Sage,
Proceedings of Institute of Mechanical Engineers, part-J: Journal of Engineering Tribology,
vol.229(12),
pp.1479-1490,
2015
Experimental Investigations of Vegetable Oil Based Cutting Fluids with Extreme Pressure Additive in Machining of AISI 1040 Steel,
By B. Satheesh Kumar, G. Padmanabhan, P. Vamsi Krishna,
Elsevier ,
Manufacturing Science and Technology,
vol.3 (1),
pp.1-9,
2015
Preparation and characterization of properties of nanographite based cutting fluid for machining operations,
By M Amrita, R R Srikant, A V Sitaramaraju, M M S Prasad and P Vamsi Krishna,
Sage,
Proceedings of Institute of Mechanical Engineers, part-J: Journal of Engineering Tribology,
vol.228(3),
pp.243-252,
2014
Performance assessment of micro and nano solid lubricant suspensions in vegetable oils during machining,
By R Padmini, P Vamsi Krishna and G. Krishna Mohana Rao,
Sage,
Proceedings of Institute of Mechanical Engineers, part-B: Journal of Engineering Manufacture,
vol.229(12),
pp.2196 – 2204,
2014
Vibration Assisted Conventional and Advanced Machining: A Review,
By M. Naresh Kumar, Kanmani Subbu S, P. Vamsi Krishna and A. Venu Gopal,
Elsevier ,
Procedia Engineering,
vol.97,
pp.1577-1586,
2014
Performance Evaluation of Vegetable Oil Based Cutting Fluids with Extreme Pressure Additive in Turning of AISI 1040 Steel,
By B. Satheesh Kumar, G. Padmanabhan, P. Vamsi Krishna,
Taylor & Francis,
Journal of Production Research & Management,
vol.4 (3),
pp.8-14,
2014
Nanofluids as potential solution for MQL- a review,
By R R Srikant, M M S Prasad, M Amrita, and P Vamsi Krishna,
Sage,
Proceedings of Institute of Mechanical Engineers, part-B: Journal of Engineering Manufacture,
vol.228(1),
pp.3-20,
2014
Work space computation using motion analysis,
By N. V. S. Shankar and P. Vamsi Krishna,
Research India Publications,
International Journal of Mechanical Engineering and Robotic Research,
vol.3 (1) ,
pp.198-203,
2014
Experimental investigations on influence of mist cooling using nanofluids on machining parameters in turning AISI 1040 steel,
By M Amrita, R R Srikant, A V Sitaramaraju, M M S Prasad and P Vamsi Krishna,
Sage,
Proceedings of Institute of Mechanical Engineers, part-J: Journal of Engineering Tribology,
vol.227(12),
pp.1334-1346,
2013
Estimation of the Dynamic Properties of Epoxy Glass Fabric Composites with Natural Rubber Particle Inclusions,
By H. Ravi Sankar, R.R Srikant, P Vamsi Krishna, V. Bhujanga Rao and P. Bangaru Babu,
The Automotive Engineering Centre (AEC), Universiti Malaysia Pahang,
International Journal of Automotive and Mechanical Engineering,
vol.7,
pp.970-982,
2013
Experimental evaluation and ANN based prediction model for dynamic properties of epoxy glass fabric composites with natural rubber particle inclusions,
By H. Ravi Sankar, R.R Srikant, P Vamsi Krishna, V. Bhujanga Rao, P. Bangaru Babu and G Bhanu Kiran,
COMADEM International,
International Journal of Condition Monitoring and Diagnostic Engineering Management,
vol.16(3) ,
pp.41-46,
2013
Experimental investigation on the application of vegetable oil based nanofluids in machining,
By R Padmini, P Vamsi Krishna, G. Krishna Mohana Rao and R R Srikant,
Elixir,
Elixir International Journal of Mechanical Engineering,
vol.54,
pp.,
2013
Experimental evaluation of the basic properties and performance of nanolubricant in machining,
By Vikas Kumar Singh, Divya Kriti, P Vamsi Krishna and R R Srikant,
American Scientific publishers,
Journal of Nano Science and Nano Technology,
vol.7(4) ,
pp.140-146,
2013
Flow simulation to study the effect of flow type on the performance of multi-material plate fin heat sinks,
By N. V. S. Shankar, Rahul Desala, Veerla Srinivas Babu, P. Vamsi Krishna, M. M. Rao,
BBlue Eyes Intelligence Engineering and Sciences Publication (BEIESP),
International Journal of Engineering Science and Advanced Technology,
vol.2 (2) ,
pp.233-240,
2012
Feature based modeling and automated process plan generation for turning components,
By P Vamsi Krishna, N V S Shankar, B Surendra Babu,
Production Engineering Institute (PEI), University of Maribor,
Advances in Production Engineering and Management Journal,
vol.6(3),
pp.153-162,
2011
Online Tool wear prediction in wet machining using modified back propagation neural network,
By R R Srikant, P Vamsi Krishna and D Nageswara Rao,
SAGE,
Proceedings of Institute of Mechanical Engineers, part-B: Journal of Engineering Manufacture,
vol.225 (7),
pp.1009-1018,
2011
Solid lubricants in machining,
By P Vamsi Krishna, R R Srikant and D Nageswara Rao,
SAGE,
Proceedings of Institute of Mechanical Engineers, part-J: Journal of Engineering Tribology,
vol.225 (4),
pp.,
2011
Optimizing surface finish in WEDM using the Taguchi parameter design method,
By P Vamsi Krishna, B SurendraBabu, P M Valli and M Swapna,
Springer ,
Journal of the Brazilian Society of Mechanical Sciences and Engineering,
vol.32(2),
pp.107-113,
2010
Experimental selection of special geometry cutting tool for minimal tool wear,
By R R Srikant, M S Subramanyam and P Vamsi Krishna,
Production Engineering Institute (PEI), University of Maribor,
Advances in Production Engineering and Management Journal,
vol.5(1),
pp.13-24,
2010
The effect of natural rubber particle inclusions on the mechanical and damping properties of epoxy filled glass fibrecomposites,
By H Ravi Sankar, P Vamsi Krishna, V Bhujanga Rao and P Bangaru Babu,
SAGE,
Proceedings of Institute of Mechanical Engineers, part-L: Journal of Materials Design and Applications,
vol.224(2),
pp.63-70,
2010
Determination of Required Quantity of Nano Cutting Fluids for Optimized Lubrication using Artificial Intelligence,
By D N Rao, R R Srikant, P Vamsi Krishna and M S Subramanyam,
Inderscience Publishers,
International Journal of Production and Quality Engineering,
vol.1 (1) ,
pp.1-6,
2010
Experimental investigation on the performance of nano boric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel,
By P Vamsi Krishna, R R Srikant and D Nageswara Rao,
Elsevier,
International Journal of Machine Tools and Manufacture,
vol.50(10),
pp.911-916,
2010
Experimental investigation to study the performance of solid lubricants in turning of AISI1040 steel,
By P Vamsi Krishna, R R Srikant and D Nageswara Rao,
SAGE,
Proceedings of Institute of Mechanical Engineers, part-J: Journal of Engineering Tribology,
vol.224(12),
pp.1273-1281,
2010
Predictive modeling of Surface roughness and tool wear in solid lubricant assisted turning of AISI 1040 steel,
By P Vamsi Krishna, D Nageswara Rao and R RSrikant,
SAGE,
Proceedings of Institute of Mechanical Engineers, part-J: Journal of Engineering Tribology,
vol.223 (6),
pp.929-934,
2009
Applicability of Cutting Fluids with Nano Particle Inclusion as Coolants in Machining,
By R R Srikant, D N Rao, M S Subramanyam and P Vamsi Krishna,
SAGE,
Proceedings of Institute of Mechanical Engineers part-J: Journal of Engineering Tribology,
vol.223(2),
pp.221-225,
2009
The influence of solid lubricant particle size on machining parameters in Turning,
By P Vamsi Krishna and D Nageswara Rao,
Elsevier,
International Journal of Machine Tools and Manufacture,
vol.48(1),
pp.107-111,
2008
Performance profiling of boric acid as lubricant in machining,
By P Vamsi Krishna and D Nageswara Rao,
Springer ,
Journal of the Brazilian Society of Mechanical Sciences and Engineering,
vol.30(3),
pp.239-244,
2008
Surface model and tool wear prediction model for solid lubricant assisted turning,
By P Vamsi Krishna, D Nageswara Rao and R R Srikant,
SAGE,
Proceedings of Institute of Mechanical Engineers, part-J: Journal of Engineering Tribology,
vol.222(5),
pp.657-665,
2008
Performance evaluation of solid lubricants in terms of machining parameters in turning,
By P Vamsi Krishna and D Nageswara Rao,
Elsevier,
International Journal of Machine Tools and Manufacture,
vol.48(10),
pp.1131-1137,
2008
Experimental investigation on influence of SiC particulate reinforcement in aluminium alloy composites,
By R N Rao, S Das and P Vamsi Krishna,
SAGE,
Proceedings of Institute of Mechanical Engineers, part-J: Journal of Engineering Tribology,
vol.222(1),
pp.1-6,
2008
An Approach to Feature Based 3-D Modeling and Similarity Assessment of Turned Components,
By P Vamsi Krishna, B Surendra Babu, D Nageswara Rao and N V S Shankar,
SAGE,
Proceedings of Institute of Mechanical Engineers, part-B: Journal of Engineering Manufacture,
vol.221(11),
pp.1651-1656,
2007
Conference(s)
Prediction of Wear Rate for Aluminium-based Nano and Hybrid Nano-composites using Machine Learning
By P. Vamsi Krishna, T. Guru Sai Nandan, Vipin Kumar Verma1, and Sri Vidhya Komarina,
8th International Conference on Nanoscience and Technology (ICNST-2025),
2025
Prediction of Wear Rate for Aluminium-based Nano and Hybrid Nano-composites using Machine Learning
By P. Vamsi Krishna, T. Guru Sai Nandan, Vipin Kumar Verma, and Sri Vidhya Komarina,
8th International Conference on Nanoscience and Technology (ICNST-2025),
2025
Tool wear prediction model for AISI 1040 steel with nanofluid in MQL turning
By Banoth Srinu, Srimanthula Srikanth, Vashisht Kant, Vamsi Krishna Pasam, and Anne Venu Gopal,
13th International Conference on Precision, Micro, Meso and Nano Engineering (COPEN-13),
2024
Effect of nozzle orientation in dual nozzle CO2 based vortex tube cooling system in turning of Ti-6Al-4V
By Banoth Srinu, P. Sai Kiran, Khirod Mahapatro and Vamsi Krishna Pasam,
International Conference on Mechanical Engineering and Technology-2024 ,
2024
Enhancing Cooling Efficiency in Dual Nozzle CO2-Based Vortex Tube Systems for Machining Titanium Alloys: Implications for Polymer and Composite Processing
By Banoth Srinu, P. Sai Kiran, Khirod Mahapatro, and P. Vamsi Krishna,
International Conference on Mechanical Engineering & Technology (ICMET-2024),
2024
Optimization of nozzle parameters in dual nozzle CO2 based vortex tube cooling system in turning of Ti-6Al-4V
By Banoth Srinu, Kosika Dheeraj Reddy, Khirod Mahapatro, and P. Vamsi Krishna,
International Conference on Recent Advances in Design and Manufacturing (RADM-2024),
2024
Prediction of Tool-Work Contact Ratio in Vibration Assisted Turning using a Decision Tree Algorithm
By Srimanthula Srikanth, Banoth Srinu, Srividhya Komarina, and Vamsi Krishna Pasam,
2nd International Conference on Recent Innovations & Developments in Mechanical Engineering (ICRIDME 2024),
2024
Experimental Investigation on Thermal Properties of Al2024 Alloy by Friction Stir Welding
By Lingaraju Dumpala, Shaik Ghouse Mohiddin, P. Vamsi Krishna and U. Rajyalakshmi,
International Conference on Technology-2023,
2023
Performance Assessment of Sustainable Machining Techniques
By Vamsi Krishna Pasam, Kartheek Gamidi, Banoth Srinu and Lingaraju Dumpala,
International Conference on Technology-2023,
2023
Influence of vegetable oil-based hybrid nano cutting fluids in titanium alloy machining
By Vashisht Kant, Khirod Kumar Mahapatro, and P. Vamsi Krishna,
International conference on recent advances in Material, Manufacturing, and Machine learning processes-2022 (RAMMML-22),
2022
Influence of vegetable oil-based hybrid nano cutting fluids in titanium alloy machining
By Vashisht Kant, Khirod Kumar Mahapatro, and P. Vamsi Krishna,
International conference on recent advances in Material, Manufacturing, and Machine learning processes-2022 (RAMMML-22),
2022
Leaf Vein Structure in Additively Manufactured Aluminium Components for Stiffness
By Jyothirmay Bhattacharjya, Meenakshi Devi Parre, and P Vamsi Krishna,
8th International & 29th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2021),
2021
Numerical Simulation of Friction Stir Welding Process to Investigate the Material Flow in AA7020
By Meenakshi Devi Parre, T Krishna Murthy, Krishnanand Lanka and P Vamsi Krishna,
2nd International Congress on Advances in Mechanical and Systems Engineering- 2021 (CAMSE-2021),
2021
Stiffness Improvement Using Leaf Vein Structure in Additively Manufactured Components
By Jyothirmay Bhattacharjya, Meenakshi Devi Parre, and P Vamsi Krishna,
International Conference on Progressive Research in Industrial & Mechanical Engineering-2021 (PRIME 2021),
2021
Design and analysis of novel gating system for slurry pump impeller
By P. Vamsi Krishna, Harshith Varma, and G. Kartheek,
International Conference on Information Technology and Mechatronics Engineering (ICITME) 2021,
2021
Performance of Coated Cutting Tools In Machining: A Review
By Rukmini Srikant Revuru, Vamsi Krishna Pasam and Nageswara Rao Posinasetti,
The International Conference on Emerging Trends in Engineering and Technology (IConETech-2020),
2020
Optimization of Machining Parameters for Vibration Assisted Turning of Ti6Al4V Alloy Using Analysis of Variance
By D. Venkata Sivareddy, P.Vamsi Krishna, A.Venu Gopal,
International Conference on. Applied Mechanical Engineering Research (ICAMER 2019),
2019
Effectiveness of Vegetable Oil based Nanofluids in Machining of Steel
By P Vamsi Krishna, Neelam Parimala,
Asian Journal Multidisciplinary Research Conference,
2019
On the Role of Amylum Additive-Based Cutting Fluids in Machining-An Experimental Investigation
By R. Padmini, P. Vamsi Krishna and P. Jeevan Kumar,
International Conference on Applied Mechanical Engineering Research (ICAMER 2019),
2019
FEM modeling of coated tools to study the influence of coating thickness
By Khirod Kumar, Hareesh, P.Vamsi Krishna ,S. Sambhu Prasad,
International Conference on Applied Mechanical Engineering Research (ICAMER 2019),
2019
Fuzzy Logic and Regression Modeling of Machining Parameters in Turning AISI 1040 Steel using Vegetable Based Cutting Fluids with Extreme Pressure Additive
By B. Satheesh Kumar, Neelam Parimala, , P. Vamsi Krishna,
International Conference on Applied Mechanical Engineering Research (ICAMER 2019),
2019
Optimization for reducing warpage in injection moulding
By P Vamsi Krishna, Pratyush Kar and G Rajesh Babu,
International Conference on Applied Engineering and Technology System 2018,
2018
Optimization of Tool and Process Parameter for Injection Molded Component
By 1Pratyush Kar, G Rajesh Babu and P Vamsi Krishna,
7th International and All India Manufacturing Technology, Design and Research Conference (AIMTDR 2018),
2018
Decision Making System for Accepting/Rejecting of an Order in MTO Environment
By K Hari Krishna, CH Sreekar, P Vamsi Krishna,
7th International and All India Manufacturing Technology, Design and Research Conference (AIMTDR 2018),
2018
Machining Performance and Sustainability of Vegetable oil based Nano Cutting Fluids in Turning
By Srinu Gugulothu, Vamsi Krishna Pasam and Rukmini Srikant Revuru,
COPEN-2017,
2017
Machinability studies on Al6061/SiCnp nanocomposites fabricated by Ultrasonic Cavitation-Assisted Stir Casting Process
By Pratyush Kar, Abhishek Ankolekar, Gourav Tiwari, and P Vamsi Krishna,
ICMTS-2017,
2017
, Effect of Johnson cook material constants on the prediction of stresses and forces in Vibration Assisted Turning of Ti6Al4V Alloy
By D Venkata Sivareddy, A Venu Gopal, P Vamsi Krishna ,
ICMTS-2017,
2017
Optimizing The Parameters For Turning With Nano Cutting Fluids In MQL Using Taguchi Based Desirability Function
By P Vamsi Krishna, R Padmini and R R Srikant,
International Journal of Arts & Sciences (IJAS) International Conference for Engineering and Technology (IJAS),
2017
Efficacy of Nanocutting Fluids in Machining An Experimental Investigation
By Vamsi Krishna Pasam, Padmini Rapeti, Surendra Babu Battula,
International Conference on Advanced Technology Innovation (ICATI2017),
2017
Influence of Tool Geometry on Residual Stresses in Vibration Assisted Turning of Ti6Al4V Alloy
By D Venkata Sivareddy, P Vamsi Krishna and A Venu Gopal,
COPEN-2017,
2017
Numerical Simulation and Comparative study of tool profiles and their effect on performance of Friction Stir Welding
By Pratyush Kar, Abhishek Ankolekar, and P Vamsi Krishna,
COPEN-2017,
2017
Effect of Fiber Orientation and Boundary Conditions on Damping In Carbon Fiber Reinforced Composites
By Harshita Cherukuri and P.Vamsi Krishna,
4th National Conference on Innovations in Mechanical Engineering (NCIME-2016),
2016
Analysis of Vegetable Oil based Cutting Fluids with Extreme Pressure Additive in Turning using Response Surface Methodology
By B. Satheesh Kumar, G. Padmanabhan, P. Vamsi Krishna,
AIMTDR-2016,
2016
Effect of Vegetable Oil Based Nanofluids on Machining Performance: An Experimental Investigation
By G Krishna Mohana Rao, R. Padmini, P. Vamsi Krishna,
World Academy of Science, Engineering and Technology, 18th International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, ICAMAME 2015,
2015
Experimental evaluation of nanofluid in Minimum Quantity Lubrication
By M Amrita, R R Srikant, A V Sitaramaraju,
Asian Tribology Conference 2014,
2014
Application of nano cutting fluids to machining: An experimental investigation
By G Krishna Mohana Rao, R. Padmini, P. Vamsi Krishna,
Third International Conference on Nanoteck & Expo,
2013
Vegetable oil based nano solid lubricants for sustainable manufacturing
By R Padmini, P Vamsi Krishna, G. Krishna Mohana Rao and R RSrikant,
International Conference on Industrial Engineering (ICIE2013),
2013
Application of nanomaterials as coolants/lubricants in machining
By P Vamsi Krishna, R R Srikant, R Padmini and JLPP Viswaditya,
International Conference on Advanced Nanomaterials and Emerging Engineering Technologies (ICANMEET2013),
2013
Environmental aspects of nano cutting fluids
By M Amrita, R R Srikant, A V Sitaramaraju, M M S Prasad and P Vamsi Krishna,
National Conference for researchers on Latest Innovations in Mechanical Engineering (LIME-2013),
2013
Performance evaluation of eco-friendly nanofluids in machining
By G. Krishna Mohana Rao, R Padmini and P Vamsi Krishna,
Recent Advances in Robotics Aeronautical and Mechanical Engineering,
2013
Evaluation of the performance of vegetable oil based nanofluids as lubricants in turning of AISI1040 steel utilizing Taguchi’s method,
By P Vamsi Krishna, R R Srikant and Pallavi Chatterjee,
International Conference on emerging trends in Mechanical Engineering, ICETME 2013,
2013
Experimental evaluation of vegetable oil based nanofluids in turning of AISI1040 steel
By R Padmini, P Vamsi Krishna, G. Krishna Mohana Rao and R R Srikant,
International Conference on Advances in Materials and Processing, AMPCO 2012,
2012
Study On Tribological Properties of Titanium Alloy With NCBN Coating
By R R Srikant, P Vamsi Krishna and¬ Srinivasa Rajaram¬,
3rd Asian Symposium on Materials and Processing (ASMP-2012),
2012
Experimental evaluation on the tribological properties and machining performance of coconut oil by the addition of boric acid nanoparticles
By P Vamsi Krishna, R R Srikant and Vikas Kumar Singh,
International conference on Nano Science and Technology (ICONSAT-2012),
2012
Preparation and characterization of MoS2 nanolubricant in SAE40 lubricating oil
By P Vamsi Krishna, R R Srikant and Pallavi Chatterjee,
National Conference on Nanomaterials NCN-2012,
2012
Basic properties and performance of vegetable oil based boric acid nanofluids in machining
By P Vamsi Krishna, R Padmini, R R Srikant and Bharat Parakh,
International Conference on emerging trends in Science, Engineering and Technology, INCOSET 2012,
2012
Analysis of the damping characteristics of glass fibre reinforced composite with different orientations and viscoelastic layers
By K Lavanya, P Vamsi Krishna, MMM Sarcar, H Ravisankar,
Second International Conference on Engineering, Technology and Management ICETM-2012,
2012
Response analysis of composite and aluminium blowers for noise reduction using FEA
By R R Srikant, P Vamsi Krishna and A Kishore,
National Conference on Design and Manufacturing, NACODM-2011,
2011
Studies on temperature distribution in single point cutting tool using CFD analysis
By R R Srikant, P Vamsi Krishna and D N Rao,
National Conference on Recent advances in Mechanical Engineering (NCRAME-2011),
2011
Experimental evaluation of the basic properties and performance of nanolubricant in machining
By P Vamsi Krishna, R R Srikant, Vikas Kumar Singh and Divya Kriti,
International conference on Nanomaterials and Nanotechnology (ICNANO-2011),
2011
Damping enhancement of epoxy glass fiber composites with interleaved natural rubber layers
By H Ravi Shankar, P Vamsi Krishna and P Bangaru Babu,
National Conference on Advanced Manufacturing Techniques (NCAMT-2009),
2009
Nano Cutting Fluids in Minimum Quantity Lubrication
By D N Rao, R R Srikant, M S Subramanyam and P Vamsi Krishna,
Multi-Conference on Engineering and Technological Innovation (IMETI 2008),
2008
Process Performance Improvement in Turning Using Graphite as Lubricant
By P Vamsi Krishna, D Nageswara Rao and R R Srikant,
23rd national Convention of Mechanical Engineers,
2007
A Feature based approach for Automatic Process Planning
By N V S Shankar, P S Rao and P Vamsi Krishna,
National conference on computer applications in Mechanical Engineering (CAME-2005),
2005
Text Book(s)
Sustainable Machining Using MQL Application of Cutting Fluids
By Nageswara Rao Posinasetti, Vamsi Krishna Pasam, Rukmini Srikant Revuru, Basil Kuriachen
(Published by: CRC Press),
Text Book,
2024
Production Technology
By Dr K L Narayana, S V Ramana and P.Vamsi Krishna
(Published by: I K Books International ),
Text Book,
2006
Book Chapter(s)
Design and Fabrication of Augmented Glenoid Implants in Total Shoulder Arthroplasty
By Chamaiporn Sukjamsri, and Vamsi Krishna Pasam in
Advanced Materials for Biomedical Applications,
CRC Press,
Book Chapter,
2022
Mechanical and Tribological Properties of AA6061-2SiCp-xGr
By Krishna P.V., Reddy A.P in
Hussain C.M., Thomas S. (eds) Handbook of Polymer and Ceramic Nanotechnology,
Springer,
Book Chapter,
2021
Nano Cutting Fluids
By Dr. Rukmini Srikant Revuru, Dr. Amrita Maddamsetti, and Dr. Vamsi Krishna Pasam in
Jerry P. Byers (ed) Metal Working Fluids, third Edition,
CRC Press London,
Book Chapter,
2017
Patent(s)
DRILL TOOL ASSEMBLY (416209)
PROJECT / CONSULTANCY
A Microwave drilling of a Different Polymer Composite materials for Aerospace applications
Role:
Co-Principal Investigator
Type: Research
Sponsor: ARDB
Project Cost (INR): 4521694
Date of Commencement: 05-08-2025
Duration: 36 Months
Status: Ongoing
Type: Research
Sponsor: ARDB
Project Cost (INR): 4521694
Date of Commencement: 05-08-2025
Duration: 36 Months
Status: Ongoing
Performance enhancement of orthopedic implants with Rotary Ultrasonic Assisted Abrasive Flow Machining (R-UAAFF)
Role:
Co-Principal Investigator
Type: Research
Sponsor: SERB - CRG
Project Cost (INR): 3363000
Date of Commencement: 21-12-2022 Date of Completion: 20-12-2025
Duration: 36 Months
Status: Completed
Type: Research
Sponsor: SERB - CRG
Project Cost (INR): 3363000
Date of Commencement: 21-12-2022 Date of Completion: 20-12-2025
Duration: 36 Months
Status: Completed
Machinability studies on ODS materials (National Centre for Development of Advanced Materials and Manufacturing Processes for Clean Coal Technologies for Power Applications)
Role:
Co-Principal Investigator
Type: Research
Sponsor: DST - through ARCI
Project Cost (INR): 9081200
Date of Commencement: 23-10-2018 Date of Completion: 30-08-2023
Duration: 58 Months
Status: Completed
Type: Research
Sponsor: DST - through ARCI
Project Cost (INR): 9081200
Date of Commencement: 23-10-2018 Date of Completion: 30-08-2023
Duration: 58 Months
Status: Completed
Vibration Assisted Turning for Improving Fatigue Life of Ti6Al4V Aerospace Components
Role:
Principal Investigator
Type: Research
Sponsor: DST- AMT, level-1
Project Cost (INR): 2860000
Date of Commencement: 14-08-2018 Date of Completion: 12-03-2020
Duration: 19 Months
Status: Completed
Type: Research
Sponsor: DST- AMT, level-1
Project Cost (INR): 2860000
Date of Commencement: 14-08-2018 Date of Completion: 12-03-2020
Duration: 19 Months
Status: Completed
Development of eco-friendly nano cutting fluids for machining
Role:
Principal Investigator
Type: Research
Sponsor: SERB -fast track young scientist scheme
Project Cost (INR): 2093000
Date of Commencement: 26-06-2013 Date of Completion: 30-07-2017
Duration: 49 Months
Status: Completed
Type: Research
Sponsor: SERB -fast track young scientist scheme
Project Cost (INR): 2093000
Date of Commencement: 26-06-2013 Date of Completion: 30-07-2017
Duration: 49 Months
Status: Completed
RESEARCH FELLOWS / PhD STUDENTS
Current PhD Students
Banoth Srinu
Area of Research:
Vibration assisted machining
Pradeep Kumar Prathipati
Area of Research:
Friction stir welding of magnesium alloys
Srimanthula Srikanth
Area of Research:
Machining
Sudhakara Sarma Sreedhara
Area of Research:
Nano Lubricants
Previous PhD Students
G. Kartheek
(2024)
Area of Research:
SPOT COOLED VIBRATION ASSISTED TURNING OF Ti6Al4V ALLOY
Maraboina Raju
(2024)
Area of Research:
Ultrasonic assisted magnetic abrasive finishing
Khirod Kumar Mahapatro
(2022)
Area of Research:
CO2 based vortex tube cooling system
D. Venkata Sivareddy
(2021)
Area of Research:
Vibration assisted machining
G. Srinu
(2019)
Area of Research:
Vegetable oil based hybrid nano cutting fluids
A. Prasad Reddy
(2019)
Area of Research:
Hybrid nanocomposites
R. Padmini
(2016)
Area of Research:
Vegetable oil based nano cutting fluids
CONFERENCE / WORKSHOP / SYMPOSIUM / SHORT TERM COURSE / FACULTY DEVELOPMENT PROGRAMME
Finishing of Orthopedic Implants with Rotary Ultrasonic Assisted Abrasive Flow Machining (R-UAAFM)
09-Dec-2024
→
09-Dec-2024
Event Type:
Workshop
Role: Co‑coordinator
Funding Agency: Department of Science and Technology
Role: Co‑coordinator
Funding Agency: Department of Science and Technology
Opportunities and Challenges in Artificial Intelligence and Machine Learning for Mechanical Engineers
24-Apr-2023
→
28-Apr-2023
Event Type:
Faculty Development Programme
Role: Co‑coordinator
Funding Agency: Electronics and ICT Academy
Role: Co‑coordinator
Funding Agency: Electronics and ICT Academy
International Conference on "Applied Mechanical Engineering Research"
02-May-2019
→
04-May-2019
Event Type:
Conference
Role: Coordinator
Funding Agency: Self‑sponsored
Role: Coordinator
Funding Agency: Self‑sponsored
Sustainable Manufacturing
22-Jun-2015
→
24-Jun-2015
Event Type:
Workshop
Role: Coordinator
Funding Agency: Self‑sponsored
Role: Coordinator
Funding Agency: Self‑sponsored
Advanced Low-dimensional Nanomaterials for Green energy, optoelectronic, and Healthcare applications
06-Jan-2025
→
10-Jan-2025
Event Type:
GIAN Course
Role: Co‑coordinator
Funding Agency: MHRD
Role: Co‑coordinator
Funding Agency: MHRD
Laser Processing of Materials
22-Jul-2019
→
26-Jul-2019
Event Type:
GIAN Course
Role: Coordinator
Funding Agency: MHRD
Role: Coordinator
Funding Agency: MHRD
Mechanics and Dynamics of Precision Machining Processes
25-Jul-2016
→
29-Jul-2016
Event Type:
GIAN Course
Role: Coordinator
Funding Agency: MHRD
Role: Coordinator
Funding Agency: MHRD
AWARDS AND ACCOLADES
2020
Best Reviewer Award
2017
Outstanding Reviewer award
ADDITIONAL RESPONSIBILITIES
- SIEMENS,Co-coordinator for Centre of Excellence for Digital Manufacturing and Automation (Continuing from August, 2024)
- Principal coordinator for MSME and PMKVY programs (March, 2023 - June, 2025)
- Faculty Advisor for Mechanical Engineering students Association (August, 2022 - July, 2023)
- Lab In-charge for CNC Machines Lab-SEIMENS CENTRE (August, 2021 - September, 2025)
- Member in Institute Information Advisory Committee (IIAC) (January, 2020 - August, 2022)
- Motor Transport section In-charge (October, 2019 - November, 2022)
- Lab In-charge for Precision Metrology lab (Continuing from July, 2015)
- Program coordinator for M.Tech Manufacturing Engineering (July, 2014 - June, 2018)
- Program coordinator for M.Tech Manufacturing Engineering (July, 2014 - June, 2018)
Last updated on December 16, 2025