×

All ResearchIDs

---

×

All Publications

---

Journal

• Eco-friendly sustainable machining with MoS2-based solid lubricant, By Avinash Borgaonkar, Ismail Syed, Sage, IMechE, Part J: Journal of Tribology, vol.237, pp.1783-1795, 2023
• Damping Capacity of Mg/Si3N4 Nanocomposites Fabricated by Ultrasonic-Assisted Stir Casting, By Mahammod Babar Pasha , G Chitti Babu, R. Narasimha Rao and Syed Ismail, Elsevier, Materials Today: Proceedings, vol., pp., 2023
• Friction and Wear Performance of Surface Textured Bearing Steel AISI 52100: A Study of Texture Distribution, By 5) Venkateswara Babu Peddakondigalla; Vasavi Boggarapu; Rajani Doppalapudi; Lakshmi Sunitha Vikram; Lakshmi Narayana K . J; Syam Kumar Chokka; Ismail Syed, Springer, International Journal on Interactive Design and Manufacturing, vol., pp., 2023
• The laser texturing of AISI 1020 material under ambient conditions using a nano-second pulsed laser, By Ramana Reddy, Syed Ismail, AIP Publishing, AIP Conference Proceedings, vol., pp., 2023
• Development of Protruded Textured HSS Cutting Tool and Study of Its Impact on Cutting Performance during Dry Turning of Al 6063 Alloy, By Prasad, K. Nagendra, and Ismail Syed, Taylor and Francis, Australian Journal of Mechanical Engineering, vol., pp., 2023
• Development of hydrophobic AISI 1020 steel surfaces through micro-texturing: A numerical study, By Satish, Syed Ismail, Elsevier, Materials Today: Proceedings, vol., pp., 2023
• Impact of Multi-scaled surface textures on tribological performance of parallel sliding contact under lubricated condition, By Ramana Reddy Annadi , Ismail Syed, Elsevier, Tribology International, vol.183, pp., 2023
• Tribological Investigation of Composite MoS2-TiO2-ZrO2 Coating Material by Response Surface Methodology Approach, By Avinash Borgaonkar, Ismail Syed, ASME, ASME Journal of Tribology, vol.144, pp., 2022
• Fabrication and Characterization of Composite MoS2-TiO2 Coating Material, By Avinash V. Borgaonkar, Ismail Syed, Shirish H. Sonawane, Sage, IMechE Part C: Journal of Mechanical Engineering Science, vol.236, pp.1838-1849, 2022
• Surface Texturing and Laser Shock Peening Processes on High-Speed Steel Tool for Sustainable Machining, By Prasad, K. Nagendra, and Ismail Syed, Springer, Arabian Journal for Science and Engineering, vol.47, pp.8589-8600, 2022
• Tribological Behavior of Mg/Fe3O4 Recycled Nanocomposites Processed Through Turning Induced Deformation Technique, By Pasha, Mahammod Babar, R. Narasimha Rao, Syed Ismail, Sravya Tekumalla, and Manoj Gupta, ASME, ASME- Journal of Tribology, vol., pp., 2022
• Microstructure, Mechanical and Ignition Characteristics of Si3N4 Reinforced Magnesium Matrix Nanocomposites, By Pasha, M. B., Rao, R. N., Ismail, S., & Gupta, M, MDPI, Applied Sciences-Basel, vol., pp., 2022
• Machining performance of protruded textured high-speed steel cutting tool under dry turning operation, By K Nagendra Prasad, Syed Ismail, Elsevier, Materials Today: Proceedings, vol., pp., 2022
• Sliding wear characteristics of Mg/Si3N4 nanocomposites at room and elevated temperatures, By Mahammod Babar Pasha, Rahul Chandra Sharma, R Narasimha Rao, Syed Ismail, Manoj Gupta, Elsevier, Materials Letters, vol.329, pp., 2022
• Assessing Mg/Si3N4 Biodegradable Nanocomposites for osteosynthesis implants with a focus on microstructural, mechanical, in vitro corrosion and bioactivity aspects, By Mahammod Pasha Babar Pasha, R Narsimha Rao, Syed Ismail, Mutlu Ozcan, P Syam Prasad, Manoj Gupta, Elsevier, Journal of Materials Research and Technology, vol.19, pp.3803-3817, 2022
• Effect of coating material properties on the lubrication performance of rolling contacts under TEHL regime, By V. Borgaonkar, A., & Syed, I, Taylor and Francis, Australian Journal of Mechanical Engineering, vol., pp., 2022
• Laser dimple texturing–applications, process, challenges, and recent developments: a review, By Prasad, K. N., Syed, I., & Subbu, S. K, Taylor and Francis, Australian Journal of Mechanical Engineering, vol., pp., 2022
• Tribological Behavior Prediction of Composite MoS2-TiO2 Coating Using Taguchi Coupled Artificial Neural Network Approach, By Avinash Borgaonkar, Ismail Syed, Sage, IMechE Part C: Journal of Mechanical Engineering Science, vol.236, pp.6835-6850, 2022
• Tribological study of multi-scale textured parallel sliding contacts by considering mixed lubrication regime and mass conservation condition, By Annadi Ramana Reddy, Syed Ismail, Sage, IMechE, Part J: Journal of Engineering Tribology, vol.236, pp.807-822, 2022
• Friction and wear behaviour of composite MoS2–TiO2 coating material in dry sliding contact, By Avinash Borgaonkar, Ismail Syed, Springer, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol., pp., 2021
• Hydrodynamic Performance of Positive Surface Textured Patterns under Mixed Lubrication, By Venkateswara Babu Peddakondigalla, Kiran Kumar Veeranapu, Ismail Syed, Vasavi Boggarapu, IOP Publishing, IOP Conference Series: Materials Science and Engineering, vol., pp., 2021
• Computational Analysis of Composite MoS2-TiO2-ZrO2 Soft Coating on Tribological Performance in Dry Sliding Contact, By Borgaonkar A.V., Syed I, Springer, Lecture Notes in Mechanical Engineering, Advanced Manufacturing Systems and Innovative Product Design, vol., pp., 2021
• Tribological performance of textured parallel sliding contact under mixed lubrication condition by considering mass conservation condition and couple-stress parameter, By Annadi Ramana Reddy, Syed Ismail, Sage, IMechE, Part J: Journal of Tribology, vol., pp., 2021
• Experimental and numerical studies of positive texture effect on friction reduction of sliding contact under mixed lubrication, By P Venkateswara Babu , Syed Ismail and B Satish Ben, Sage, IMechE, Part J: Journal of Tribology, vol., pp., 2021
• Effect of Temperature on the Tribological Performance of MoS2-TiO2 Coating Material, By A.V. Borgaonkar, S. Ismail, Springer, Lecture Notes in Mechanical Engineering, Advances in Applied Mechanical Engineering, vol., pp., 2020
• Influence of Surface Textures by Ink-Jet Print Followed by Chemical Etching Process on the Performance of HSS Cutting tool, By Prasad K. N., and Syed I, Springer, Lecture Notes in Mechanical Engineering, Advances in Applied Mechanical Engineering, vol., pp., 2020
• Experimental investigation on effects of positive texturing on friction and wear reduction of piston ring/cylinder liner system, By Venkateswara Babu, P., Ismail Syed, Satish Ben, B.,, Elsevier, Materials Today: Proceedings, vol., pp., 2020
• Effect of coatings on rolling contact fatigue and tribological parameters of rolling/sliding contacts under dry/lubricated conditions: a review, By Borgaonkar, A. V., & Syed, I, Springer, Sadhana, vol., pp., 2020
• Optimization of Texture Geometry for Enhanced Tribological Performance in Piston ring-Cylinder Liner Contact under Pure Hydrodynamic and Mixed Lubrication, By Babu, P.V., Syed, I., Ben, B.S. , Springer, Lecture Notes in Mechanical Engineering, Innovative Product Design and Intelligent Manufacturing Systems, vol., pp., 2020
• Lubricant selection and post forming material characterization in incremental sheet forming, By Amrut Mulay, Satish Ben and Syed Ismail , IOP Publishing, IOP Conference Series: Materials Science and Engineering, vol., pp., 2020
• Influence of surface textures on the hydrodynamic performance of parallel sliding contacts in turbulent regime, By Syed, I. and Sarangi, M, Springer, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol., pp., 2020
• Modification of Surface Topography and Analysis of Its Impact on Friction and Wear Reduction of Sliding Contact, By P Venkateswara Babu., Syed Ismail and Satish Ben Beera , Blue Eyes Intelligence Engineering and Sciences Publication, International Journal of Engineering and Advanced Technology, vol., pp., 2019
• Prediction of average surface roughness and formability in single point incremental forming using artificial neural network, By Amrut Mulay, B.Satish Ben, Syed Ismail and Andrzej Kocanda , Elsevier, Archives of Civil and Mechanical Engineering, vol., pp., 2019
• Influence of positive texturing on friction and wear properties of piston ring-cylinder liner tribo pair under lubricated conditions, By Venkateswara Babu P., Ismail Syed and Satish Ben Beera, Emerald, Industrial Lubrication and Tribology, vol., pp., 2019
• Combined effects of fluid–solid interfacial slip and fluid inertia on the hydrodynamic performance of square shape textured parallel sliding contacts, By Ismail Syed and Sarangi M, Springer, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol., pp., 2018
• Performance evaluation of high-speed incremental sheet forming technology for AA5754 H22 aluminum and DC04 steel sheets, By Amrut Mulay, B.Satish Ben, Syed Ismail, Andrzej Kocanda and Cezary Jasiński, Elsevier, Archives of Civil and Mechanical Engineering, vol., pp., 2018
• Development of Finite Element Based Model for Performance Evaluation of Nano Cutting Fluids in Minimum Quantity Lubrication, By Rukmini Srikant Revuru, Vamsi Krishna Pasam, Ismail Syed and Uday Kumar Paliwal, Elsevier, CIRP Journal of Manufacturing Science and Technology, vol., pp., 2018
• Experimental investigations into the effects of SPIF forming conditions on surface roughness and formability by Design of Experiments, By Amrut Mulay, B.Satish Ben, Syed Ismail, and Andrzej Kocanda, Springer, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol., pp., 2017
• Experimental Investigation and Modeling of Single Point Incremental Forming for AA5052-H32 Aluminum Alloy, By Amrut Mulay, B.Satish Ben, Syed Ismail, and Andrzej Kocanda, Springer, Arabian Journal of Science and Engineering, vol., pp., 2017

Conference

• Enhancing the Tribological Properties of Magnesium by Reinforcing Si3N4 Nano-Particles for Elevated Temperature Applications By Babar Pasha Mahammod, Narasimha Rao Rajamalla, Ismail Syed, 15th International Conference on Materials Processing and Characterization, 2023
• Study of sand particle erosive wear behaviour of advanced aluminum matrix composites By Golla Chittibabu a , R.Narasimha Rao, Syed Ismail, Mahammod Babar Pasha, 1st International Conference of Mechanical Engineering: Researches and Evolutionary Challenges (ICMech-REC 23), 2023
• Tribological behaviour of titanium carbide reinforced aluminium composite materials By G. Chittibabu, Ch. Sri Chaitanya, Babar Pasha Mahammod, Manoj Gupta, Syed Ismail and R. Narasimha Rao, International Conference on Smart Materials and Structures, 2022
• Influence of Hydrodynamic Pressure Gradient on Viscous Friction in Textured Parallel Sliding Contacts By Ramana Reddy Annadi and Syed Ismail, National Conference in Mechanical Engineering: Advances in Materials and Design, 2022
• Evaluation of engine oil tribological performance through four ball tester By P Venkateswara Babu, Ismail Syed and Vasavi Boggarapu, 2nd International Conference on Innovative Product Design and Intelligent Manufacturing Systems, 2021
• Development and Investigation of the Tribological Performance of pure MoS2 and composite MoS2-TiO2-ZrO2 Coating Material By Avinash V. Borgaonkar, Deepak Rai and S. Ismail., 10th International Conference on Industrial Tribology, 2019
• Modification of Surface Topography and Study of Its Impact on Friction and Wear Reduction of Sliding Contact By P Venkateswara Babu., Syed Ismail and Satish Ben Beera, The 2nd World Summit on Advances in Science, Engineering and Technology, 2019
• Effect of couple stresses parameter and mixed lubrication regime condition on the performance of piston ring/cylinder liner assembly by considering JFO cavitation condition By Ramana Reddy Annadi, Syed Ismail, Proceedings of the International Conference on Recent Advances in Materials, Manufacturing and Energy Systems, 2019
• Cross-linking Density Effect on Material Properties of an Diglycidylether of Bisphenol F / Tri-ethylene Tetramine Epoxy System Using Molecular Dynamics Simulations By Ismail Syed and Vijaya Kumar Olugu, 2nd International Conference on Mechanical Engineering and Robotics Research , 2017
• Effect of Positive Textures Size on Tribological Performance of Piston ring/Cylinder liner assembly By Yogesh Thakre, Syed Ismail, Venkateswara Babu P, 9th International Conference on Industrial Tribology, 2017

Book Chapter

• Tribological Investigation of Developed Nano-composite Mos2-Tio2-Zro2 Coating Material By Avinash V. Borgaonkar, Deepak Rai, Ismail Syed in Tribology and Characterization of Surface Coatings, Wiley, Engineering, 2022
• Effects of Lubrication on Tribological Properties of Composite MoS2-TiO2 Coating Material By Borgaonkar, A. V., Syed, I., & Sonawane, S. H. in Tribological Applications of Composite Materials, Springer, Engineering, 2021
• Scientific Insights on Tribological Aspects of Polymer-Based Composites By Dheeraj Kumar Gara, G Raghavendra, Shakuntala Ojha, Sri Bandyopadhyay, Syed Ismail, and R Narasimha Rao in Tribology of Polymer and Polymer Composites for Industry 4.0, Springer, Engineering, 2021

×

Previous Students

---