×

All ResearchIDs

---

×

All Publications

---

Journal

• Investigation of nitric oxides emission control using dual-approach exhaust gas recirculation and quaternary blends: performance, combustion, and emission characteristics, By B. Balaji, V. B. Alur, M. M. Kotha & P. S. Ranjit, Springer, International Journal of Environmental Science and Technology, vol.21, pp.447-466, 2024
• Significance of fuel additives on the performance and emission characteristics of diesel engine with biodiesel fuel: a review, By Anil Kumar Alli & Madhu Murthy Kotha, Taylor and Francis, International Journal of Ambient Energy, vol.44:1, pp.1990-2004, 2023
• Experimental Investigation of Carbon nanotube additives on CRDI engine fueled with Chlorella Vulgaris Microalgae Methyl Ester and Bio-ethanol blends: Performance, Emission and Combustion characteristics, By Ajmeera Suresh, A. Babu Veeresh, Bhukya Balaji, K. Madhu Murthy, P.S. Ranjit, Taylor and Francis, Biofuels, vol.14:6, pp.551-563, 2023
• Numerical Study of the Flow & Thrust Performancefor Angular Twin Inlet Pintle Nozzle, By P. Sunitha Rao , Dr.K. Madhu Murthy, Dr. V.V.Rao, Kalahari, International Journal of Mechanical Engineering, vol.7 No. 1, pp.5267-5272, 2022
• Direct methanol fuel cells for automotive applications: a review, By G. Amba prasad Rao, K. Jayasimha Reddy, R. Meenakshi Reddy, K. Madhu Murthy & G. Naga Srinivasulu, Taylor & Francis, International Journal of Ambient Energy, vol.43(1), pp.7349-7370, 2022
• Numerical Investigation on Thermal performance of PCM based Hybrid Micr-channel Heat sinks for Electronics Cooling Applications, By Ramesh K.N., Sharma T.K., Rao GAP, Murthy KM, Springer, Arabian Journal for Science and Engineering, vol.48, pp.2779–2793, 2022
• Geometrical Burnback Analysis and Optimization of 3d Propellant Grains, By P.Sunitha, Dr K. Madhu Murthy, Dr. V.V. Rao, East China University of Science and Technology, Journal of East China University of Science and Technology, vol.65(3), pp.261–268, 2022
• Design and Validation of 3-D Solid Propellant Grain for Large Rocket Motors, By P.Sunitha, Dr K. Madhu Murthy, Dr. V.V. Rao, ACTA Scientific, ACTA Scientific Pharmacology, vol.2 Issue 10, pp.30-35, 2021
• Production process optimization of Sterculia Foetida Methyl Esters (Biodiesel) using Response Surface Methodology, By Vinod Babu Marri, Madhu Murthy Kotha, Amba Prasad Rao Gaddale, Taylor and Francis, International Journal of Ambient Energy, vol., pp., 2020
• The Performance, emissions investigations of Compression Ignition (CI) engine by using Algal biomass as an antioxidant additive in Coconut, Karanja methyl esters, By Katam Ganesh Babu, A. Veeresh Babu, K. Madhu Murthy, Ganesh S. Warkhade, Springer, Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, vol.90, pp.925-391, 2020
• Investigations of DI CI Engine using Algal particles contained Coconut Biodiesel, By Katam Ganesh Babu, A.Veeresh Babu, K.Madhu Murthy, International journal of Energy Technology, International journal of Energy Technology, vol.1, pp.52-61, 2019
• Mixed Culture Microalgae-Based Coconut Biodiesel as Fuel to improve DI CI Engine performance, Emission Characteristics, By K. Ganesh Babu, A. Veeresh Babu, K. Madhu Murthy, M. Kiran Kumar, Trans Tech Publications Switzerland, J Applied Mechanics and Materials, vol.877, pp.347-353, 2018
• Experimental investigations on the influence of higher injection pressures and retarded injection timings on a single cylinder CRDi diesel engine, By Vinod Babu Marri, Madhu Murthy Kotha, Amba Prasad Rao Gaddale, Taylor and Francis, International Journal of Ambient Energy, vol., pp., 2018
• Numerical Technique for Resolving the Dual Phase Lag Heat Conduction in Thin Film Metal, By T. Karthikeya Sharma, Dhanaraj Savary Nasan, G. Amba Prasad Rao, K. Madhu Murthy, Taylor and Francis, Heat Transfer Engineering, vol.41, pp.665-675 , 2018
• Simulation of CI engine flow processes for prediction of performance and emissions with different fuels, By Amba Prasad Rao, Shashank Nikku, M. Vinod Babu, K. Madhu Murthy, Taylor and Francis, International Journal of Ambient Energy, vol.39, pp., 2017
• Butanol and Pentanol: The promising biofuels for CI engines – A review, By Vinod Babu Marri, Madhu Murthy. K, Amba Prasad Rao G, Elsevier, Renewable and Sustainable Energy Reviews, vol.78, pp.1068-1088, 2017
• Effective reduction of NOx emissions from diesel engine using split injections, By R. Sindhu, G. Amba Prasad Rao and K. Madhu Murthy, Elsevier, Alexandria Engineering Journal, vol., pp., 2017
• Semi-Active Suspension System using MR Fluid For A Full Car Model, By Chandrakanth Naik and Dr. K. Madhu Murthy, Elsevier, International Journal of Engineering Technology, Management and Applied Sciences, vol.5, pp.4683-4688, 2017
• Review on algae for biodiesel fuel production, its characteristics comparison with other and their impact on performance, combustion and emissions of diesel engine, By Ganesh Babu Katam, Veeresh Babu A, Madhu Murthy K, Ganesh Warkhade, Emerald insight, World Journal of Engineering, vol.14(2), pp.127-138, 2017
• Effect of reformed EGR on the performance and emissions of a diesel engine: A Numerical study, By Thirumala Sai Kumar, T. Karthikeya Sharma, K. Madhu Murthy, G. Amba Prasad Rao, Elsevier, Alexandria Engineering Journal, vol., pp., 2017
• Numerical Analysis of a Vortex Tube: A Review, By Karthikeya Sharma, G. Amba Prasad Rao, K. Madhu Murthy, Springer, Archives of Computational Methods in Engineering (State of the Art Reviews) , vol.24, pp.251–280, 2017
• Effect of split injection in mitigation of pollutant formation from a CI engine: a numerical study, By R. Sindhu, G. Amba Prasad Rao and K. Madhu Murthy, Springer, J Braz. Soc. Mech. Sci. Eng, vol.38, Issue 7, pp.1865–1876, 2016
• Control of peak pressures of an HCCI engine under varying swirl and operating parameters, By Karthikeya Sharma, G. Amba Prasad Rao, K. Madhu Murthy, Springer, Front. Energy, vol.10(3), pp.337-346, 2016
• Homogeneous Charge Compression Ignition (HCCI) Engines: A Review, By Karthikeya Sharma G. Amba Prasad Rao and K. Madhu Murthy, Springer, Archives of Computational Methods in Engg, vol.23, Issue 4, pp.623–657, 2016
• A review on comparison of some edible, inedible and waste oil sources with Algae for biodiesel production, By K. Ganesh Babu, A. Veeresh Babu, K. Madhu Murthy, Iranica Journal of Energy & Environment, Iranica Journal of Energy & Environment, vol.7, pp.315-324, 2016
• Effect of swirl on performance and emissions of CI engine in HCCI mode, By Karthikeya Sharma, G. Amba Prasad Rao & K. Madhu Murthy, Springer, Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.37, Issue 4, pp.1405–1416, 2015
• Enhancement of rate of heat transfer in HCCI engine with induction induced swirl and under varying compression ratios and boost pressures, By Karthikeya Sharma, G. Amba Prasad Rao, K. Madhu Murthy, Springer, Journal of Mechanical Science and Technology, vol.29, Issue 10, pp.4545–4553, 2015
• Design Optimization of A Riveted Joint Used in Back Plate of A Pendulum Absorber Assembly, By Ratnadeep Bhattacharjee, Madhu Murthy, G. Amba Prasad Rao, STM Journals, Trends in Mechanical Engineering & Technology, vol.5, Issue 1, pp. 36-50, 2015
• Numerical investigations on HCCI engine with increased induction induced swirl and engine speed, By Karthikeya Sharma, G. Amba Prasad Rao, K. Madhu Murthy, Springer, Journal of Central South University, vol.22, Issue 10, pp.3837–3848, 2015
• Experimental investigations of effects of cooling/non cooling of EGR on two level of compression ratio in a common rail diesel engine, By Nilesh Gajarlawar, Gaddale Amba Prasad Rao and K Madhu Murthy, Thermal Science (Serbia), Thermal Science (Serbia), vol.19 Issue 6, pp.1995-2002, 2015
• Thermodynamic Modelling of Single Cylinder Direct Injection Compression Ignition Engine in Simulink, By R. Sindhu, G. Amba Prasad Rao and K. Madhu Murthy, Trans Tech, Applied Mechanics and Materials, vol.813-814, pp.866-873, 2015
• Effective reduction of NOx emissions of a HCCI (Homogeneous charge compression ignition) engine by enhanced rate of heat transfer under varying conditions of operation, By Karthikeya Sharma G. Amba Prasad Rao and K. Madhu Murthy, Elsevier, Energy, vol.93, pp.2102 to 2115, 2015
• Effective reduction of in-cylinder peak pressures in Homogeneous Charge Compression Ignition Engine – A computational study, By Karthikeya Sharma G. Amba Prasad Rao and K. Madhu Murthy, Elsevier, Alexandria Engineering Journal, vol.54, Issue 3, pp.373-382, 2015
• Prediction of HCCI engine performance with Three Zone Extended Coherent Flame Combustion model, By Karthikeya Sharma, G. Amba Prasad Rao, K. Madhu Murthy, Applied Mechanics and Materials, Applied Mechanics and Materials, vol.592-594, pp.1738-1745, 2014
• Thermodynamic modelling of diesel engine processes for predicting engine performance, By R. Sindhu, G. Amba Prasad Rao and K. Madhu Murthy, International Journal of Applied Engineering and Technology, International Journal of Applied Engineering and Technology, vol.4 (2), pp.101-114, 2014
• Effects of Water-Diesel Emulsion on the Emission Characteristics of Single Cylinder Direct Injection Diesel engine - A Review, By Raj Kumar Gupta, K.A. Sankeerth, T. Karthikeya Sharma, G. Amba Prasad Rao and Madhu Murthy, Trans Tech Publications, Applied Mechanics and Materials, vol.592-594, pp.1526-1533, 2014
• Application of Control Systems to Meet Stringent Emissions of Modern Automobiles: A Review, By Sindhu Ravichettu, G. Amba Prasad Rao, Madhu Murthy, STM journals, Trends in Mechanical Engineering & Technology, vol.3, Issue 1, pp.9-17, 2013
• Combustion Analysis of Ethanol in HCCI diesel Engine, By Karthikeya Sharma, G. Amba Prasad Rao, K. Madhu Murthy, STM Journals, Trends in Mechanical Engineering, vol.3, Iss. 1, pp.1-9, 2013
• Effective Reduction of Emissions of a DI Diesel Engine fuelled with Biodiesel and Diesel Blends with Oxygenated Additives, By S. V. Prasad, K. Madhu Murthy and G. Amba Prasad Rao, Journal of Alternate Energy Sources & Technologies, Journal of Alternate Energy Sources & Technologies, vol.3, Iss 2, pp.1-10, 2012
• NOx Reduction Strategies for a B40 Fuelled Direct Injection Diesel Engine, By S. V. Prasad, K. Madhu Murthy and G. Amba Prasad Rao, International Journal of Mechanical Engineering, International Journal of Mechanical Engineering, vol.5 No.1, pp.19-24, 2012
• The Life Cycle Cost Analysis of Solar Stirling Dish Power Generation System, By Krishnaiah, S. SrinivasaRao and K. Madhu Murthy, Taylor and Francis, Journal of Energy Sources Part B: Economics, Planning, and Policy, vol.7, pp.131-139, 2012
• Performance of HCCI Diesel Engine under the Influence of Various Working and Geometrical Parameters, By Karthikeya Sharma, G. Amba Prasad Rao and K. Madhu Murthy, IRD India, International Journal on Theoretical and Applied Research in Mechanical Engineering (IJTARME), vol.1: Issue 1, pp.23-31, 2012
• Zero Dimensional Simulation of Combustion Process of a DI Diesel Engine Fuelled with Biofuels, By Donepudi Jagadish, Puli Ravi Kumar, Madhu Murthy, World Academy of Science, Engineering and Technology, International Journal of Mechanical and Materials Engineering, vol.2, No.1, pp.18-24, 2011
• Effective Utilization of B20 Blend with Oxygenated Additives, By S. V. Prasad, K. Madhu Murthy and G. Amba Prasad Rao, Thermal Science, Thermal Science, vol.15, No. 4, pp.1175-1184, 2011
• The Effect of Supercharging on Performance and Emission Charcteristics of C.I. Engine with Diesel-Ethonol-Ester blends, By Donepudi Jagadish, Puli Ravi Kumar, and Madhu Murthy, Journal of Thermal Science, Journal of Thermal Science, vol.15, No. 4, pp.1165-1174, 2011
• Performance and Emission Characteristics of Diesel Engine run on Biofuel based on Experimental and Semi Analytical Methods, By Donepudi Jagadish, Puli Ravi Kumar, Madhu Murhty,  International Journal of Energy and Environment,  International Journal of Energy and Environment, vol.2, No.5, pp.899-908, 2011
• Performance Charcteristics of Diesel Engine Operated on Biodiesel with Exhaust Gas Recirculation, By Donepudi Jagadish, Puli Ravi Kumar, Madhu Murthy, SCIRP,  International Journal of Advanced Engineering and Technology, vol.2, Issue.2, pp.202-208, 2011
• Addition of Ester (Biodiesel) to Ethanol-Diesel Blend to Improve the Engine Performance and to Control the Emissions of Nitrous Oxides, By Donepudi Jagadish, Ravi Kumar Puli ,  Madhu Murthy, Scientific and Academic, Energy and Power, vol.1, pp.1-5, 2011
• A mathematical model to evaluate wear depth of an aluminium alloy reinforced with a silicon carbide particle composite using finite element analysis, By N. Rao and K.M. Murthy, SAGE, Proc. IMechE, Part-L: J. Materials: Design and Applications, vol.224 (3), pp.133-138, 2010
• Determination of Ecolgical Efficiency of Direct Injection Diesel Engine Fuelled with Biofuels, By Donepudi Jagadish, Puli Ravi Kumar, Madhu Murthy, International Journal of Mechanical and Automobile Engineering, International Journal of Mechanical and Automobile Engineering, vol.11, Issue No.1, pp.26-32, 2010
• Economic Analysis of Solar Dish-Stirling System for Power Generation in India, By Krishnaiah, S. Srinivasa Rao and K. Madhu Murthy, ANU Journal of Engineering & Technology, ANU Journal of Engineering & Technology, vol.1, No. 1, No. 2, pp.61-64, 2009
• Studies on Swirl Generated Recirculation Zone in a Conical Combustor with Secondary Air, By Madhu Murthy, ANU Journal of Engineering & Technology, ANU Journal of Engineering & Technology, vol.1, No. 1, pp.78-84, 2009
• Effect of Submergence and Air flow Rate On The Performance of Air Lift Pump - An Experimental Investigation, By Srinivasa Rao, S. Srinivasa Rao and K. Madhu Murthy, Elsevier, International Journal on Mechanical & Automobile Engineering (IJMAE), vol.2, No.2, pp. 1-6, 2009
• Solar Stirling Dish Power Generation Atlas of India, By Krishnaiah, S. SrinivasaRao and K. Madhu Murthy, Taylor and Francis, Cogeneration and Distributed Generation Journal, vol.24, No. 2, pp.35-50, 2009
• Effect of Exhaust Gas Recirculation on Performance of D.I. Diesel Engine, By Donepudi Jagadish, Puli Ravi Kumar, Madhu Murthy, ANU Journal of Engineering & Technology, ANU Journal of Engineering & Technology, vol.1, No. 2, pp.56-60, 2009
• Staus quo of Technical Education, By V. Srinivas, V. Rama Devi, A. Ratnakar, K. Madhu Murthy, The Journal of Engineering Education, The Journal of Engineering Education, vol.XXI No.4, pp.42-45, 2008
• Prediction of Mechanical Properties of Unidirectional Fiber Reinforced Composite with Fiber-Matrix Debonding, By S. Rao, V.B.K. Murthy , K. Madhu Murthy and K.M. Rao, International Journal of Theoretical and Applied Mechanics (IJTAM) , International Journal of Theoretical and Applied Mechanics (IJTAM) , vol.3 No.1, pp.85-96, 2008
• Modeling and Simulation of a Gamma type Stirling Engine Powered by a Solar Parabolic Dish Collector, By Krishnaiah, S. Srinivasa Rao and K. Madhu Murthy, Euro Journals, European Journal of Scientific Research, vol.20 No.1, pp.163-176, 2008
• Parametric study of flow through engine exhaust port using CFD, By Rao, G.U., Murali, S., Marathe, N.V., Murthy, K.M.,, International Journal of Heat & Technology, International Journal of Heat & Technology, vol. 26, No 2, pp.1-8, 2008
• A Neural Network Approach for Modelling Global Solar Radiation, By Krishnaiah, S. Srinivasa Rao and K. Madhu Murthy, Insinet Publications, Journal of Applied Sciences Research, vol.3(10), pp.1105-1111, 2007
• Competency Mapping – A tool for skill gap analysis, By Madhu Murthy, GITAM Journal of Management, GITAM Journal of Management, vol.5 No.1, pp.26-40, 2007
• Preparing for a creative profession: Engineering, By Madhu Murthy, ISTE, Indian Journal of Technical Education, vol.29, No.1, pp.51-57, 2006
• Focus on Analogies, Anecdotes and Paradoxes for Enhancing Effectiveness of Teaching – Some Examples in Fluid Mechanics, By Madhu Murthy, The Journal of Engineering Education, The Journal of Engineering Education, vol.XIX No.3, pp.115-132, 2006
• Entrepreneur: Evolution of the Concept and Characteristics, By Madhu Murthy, SAGE, The Small Enterprise Development, Management and Extension Journal (SEDME), vol., pp.1-20, 2002
• Training in Engineering Institutes, By Madhu Murthy, The Journal of Engineering Education, The Journal of Engineering Education, vol.XIV No.1, pp.34-40, 2000
• Marketing strategy of National Textile Corporation - A case study, By Ravinder Reddy and K. Madhu Murthy, The Indian Journal of Marketing, The Indian Journal of Marketing, vol., pp., 1996

Conference

• Machine Learning-Based Prediction of Butanol-Diesel Dual Fuel Engine Performance and Emissions By Alli Anil Kumar, Nayan Pramod Vilhekar, Kotha Madhu Murthy, ICMech-REC-23, 2023
• Design And Testing Of A Solid Divert And Attitude Control System (S-DACS) By P Sunitha, Dr. K Madhu Murthy, Dr. V V Rao, 10th International Conference and Exhibition on Mechanical and Aerospace Engineering (Mech Aero 2022), 2022
• Design, Optimisation And Testing Of Finocyl Propellant Grain For Rocket Motors By P Sunitha, Dr. K Madhu Murthy, Dr. V V Rao, International Conference on Recent Advances in Mechanical Engineering(ICRAM), 2022
• Burn-back Analysis Of 3-D Propellant Grain for Large Solid Rocket Motors By P Sunitha, Dr. K Madhu Murthy, Dr. V V Rao, International Conference on Research Contributions in Mechanical Engineering, 2022
• Design And Geometric Optimization Of Solid Propellant Grain For Large Motors By P Sunitha, Dr. K Madhu Murthy, Dr.V V Rao, 31st International Symposium On Ballistics (ISB), 2019
• Overcoming the Challenges of HCCI Combustion By T. Karthikeya Sharma, G. Amba Prasad Rao, K. Madhu Murthy, Mobility Engineering, 2018
• Investigations of DI CI Engine using Algal particles contained Coconut Biodiesel By Katam Ganesh Babu, A.Veeresh Babu, K.Madhu Murthy, International Conference on Energy, Environment and Economics (ICEEE2017), 2017
• Numerical Study of Equivalence Ratio and Swirl Effect on the Performance and Emissions of a HCCI Engine By Karthikeya Sharma, G. Amba Prasad Rao, K. Madhu Murthy, Dhanraj Savary Nasan, 1st International and 18th ISME Conference on Enabling Sustainable Development in Mechanical Engineering, 2017
• Performance Analysis of a CI Engine using Palm Stearin and Pongamia Oil Based Biodiesel By R. Babu, G. Amba Prasad Rao, K. Madhu Murthy, M. Vinod Babu, 1st International and 18th ISME Conference on Enabling Sustainable Development in Mechanical Engineering, 2017
• A Review of Strategies to Control the Auto Ignition in HCCI Combustion By Lavish Mittal, M. Vinod Babu, Madhu Murthy, G. Amba Prasad Rao, T. Karthikeya Sharma, 1st International and18th ISME Conference on Enabling Sustainable Development in Mechanical Engineering, 2017
• Numerical Technique for Resolving the Dual Phase Lag Heat Conduction in Thin Film Metal By Karthikeya Sharma, Dhanaraj Savary Nasan, G. Amba Prasad Rao, K. Madhu Murthy, 1st International and 18th ISME Conference on Enabling Sustainable Development in Mechanical Engineering, 2017
• Design of A Pulsed Solid Propellant Divert and Attitude Control System (DACS) By P Sunitha, Dr. K Madhu Murthy, Dr. V V Rao, 30th International Symposium on Ballistics(ISB), 2017
• Effective Mitigation of NOx Emissions from Diesel Engine with Split Injections By Sindhu, G. Amba Prasad Rao, K. Madhu Murthy, 1st International and 18th ISME Conference on Enabling Sustainable Development in Mechanical Engineering, 2017
• Parametric Optimization of Sterculia Foetida Based Methyl Esters – A Promising Fuel for CI Engines By Vinod Babu M, Madhu Murthy, G. Amba Prasad Rao, 1st International and 18th ISME Conference on Enabling Sustainable Development in Mechanical Engineering , 2017
• Implementation of Hot gas bypass defrost in domestic refrigerator and its comparison with electrical heater defrost By Karthik N, K. Madhu Murthy, Prof. G. Amba Prasad Rao, Proceedings of the International Conference on Emerging Trends in Engineering and Technology (ICET), 2016
• Influence of Fuel Injection Parameters on the Performance and Emissions of CI Engine with neat Biodiesel By US Vara Prasad, Madhu Murthy, G. Amba Prasad Rao and Vinod Babu Marri,  International Conference on Paradigms in Engineering & Technology (ICPET 2016), 2016
• NOx and Particulate Matter Reduction Techniques: A Review By Thirumal Sai Kumar J, Vinod Babu Marri, Madhu Murthy K and Amba Prasad G, International Conference on Paradigms in Engineering & Technology (ICPET 2016), 2016
• Influence of piston bowl pip angle on HCCI engine performance and emissions By Karthikeya Sharma, G. Amba Prasad Rao and K. Madhu Murthy, 24thNational Conference on Internal Combustion Engines and Combustion (NCICEC-2015), 2015
• Real-Time Single Zone Model for Simulation of a Diesel Engine in SIMULINK Environment By Sindhu, G. Amba Prasad Rao and K. Madhu Murthy, International Conference on Computing, Communication and Automation (ICCCA2015), 2015
• Thermodynamic and Dynamic Modelling of Single Cylinder Direct Injection Diesel Engine for Real-Time Control in Simulink By Sindhu, G. Amba Prasad Rao and K. Madhu Murthy, International Conference on Mechanical and Manufacturing Engineering, 2015
• Influence of Piston Bowl Shape on Flow and Combustion Characteristics in HCCI engine- A CFD study By Karthikeya Sharma, G. Amba Prasad Rao and K. Madhu Murthy, International Conference on New Frontiers in Chemical, Energy and Environmental Engineering (INCEEE), 2015
• Effect of induction swirl and EGR on the performance and emissions of a HCCI engine By Karthikeya Sharma G. Amba Prasad Rao and K. Madhu Murthy, Sixth International Conference on Theoretical, Applied, Computational and Experimental Mechanics, 2014
• A Computational Study Of HCCI Engine With External Mixture Formation Technique By Karthikeya Sharma, G. Amba Prasad Rao & K. Madhu Murthy, ASME 2014 International Mechanical Engineering Congress & Exposition (IMECE), 2014
• Impact of antioxidant additives on emission characteristics of a biodiesel fuelled diesel engine - A Review By Umesh G. Gharat, K.A. Sankeerth, T. Karthikeya Sharma, G. Amba Prasad Rao and Madhu Murthy, Advances in Mechanical Engineering, Proceedings of the International Mechanical Engineering Congress (IMEC), 2014
• Prediction of HCCI engine performance with Three Zone Extended Coherent Flame Combustion model By Karthikeya Sharma, G. Amba Prasad Rao & K. Madhu Murthy, Proceedings of the International Mechanical Engineering Congress (IMEC), 2014
• Effect of design and operating parameters on a HCCI Direct Injection Diesel Engine By Karthikeya Sharma, Prof. K. Madhu Murthy, Prof. G. Amba Prasad Rao, International Conference on Electrical, Electronics and Computer Science (ICEECS-2012) & Mechanical and Industrial Engineering (ICMIE-2012), 2012
• Modeling Diesel Engine Flow Processes for Performance and Emissions By Venkateshwar Rao, K. Madhu Murthy, G. Amba Prasad Rao, International Conference on Trends in Industrial and Mechanical Engineering (ICTIME’2012), 2012
• Evaluation of particulate traps for reduction of diesel engine exhaust smoke By Mallikarjuna Rao, G. Amba Prasad Rao and K. Madhu Murthy, International Conference on Trends in Industrial and Mechanical Engineering, 2012
• Influence of Fuel Injection Parameters of DI Diesel Engine Fuelled With Biodiesel and Diesel Blends By USV Prasad, Madhu Murthy, and G. Amba Prasad Rao, International Conference in Mechanical, Automobile and Robotics Engineering (ICMAR’2012), 2012
• Effect of oxygenated additives on control of emissions in a DI diesel engine using biodiesel-Diesel blend By USV Prasad, Madhu Murthy, G. Amba Prasad Rao, International Conference in Mechanical, Automobile and Robotics Engineering, 2012
• Effect of Ethanol and Diethyl Ether as additives for improving performance of engine with biodiesel blends By USV Prasad, Madhu Murthy, G. Amba Prasad Rao, IIIrd International Conference on "Advances in Energy Research, 2011
• Biodiesel Preparation  by Transesterfication and Testing in a Diesel Engine By Donepudi Jagadish, Puli  Ravi  Kumar, Madhu  Murthy, International Conference on Recent Innovations in Technology, 2011
• Methods to predict equivalence ratio and particulate matter from diesel engine By Donepudi Jagadish, Puli Ravi Kumar, Madhu Murthy, National Conference on Advances in Mechanical Engineering [AIM-2010], 2010
• Performance studies of Diesel Engine operated on Biodiesel with Exhaust Gas Recirculation By Donepudi Jagadish, Puli Ravi Kumar, Madhu Murthy, National Conference on Advances in Mechanical Engineering , 2010
• CFD approach for the design of Engine exhaust port By Gade Upender Rao, S. Murali, Dr. N.V. Marathe, K. Madhu Murthy, International Conference & XX National Conference on IC Engines and Combustion (ICONICE-2007), 2007
• Solar Global radiation predictions for India using ANN Model By Krishnaiah, S. Srinivasa Rao, K. Madhu Murthy and Srinivasa Reddy, 3rd International Conference on Solar Radiation and Day Lighting (Solaris 2007), 2007
• An overview of Nano-technology and its future prospects By CSP Rao, Madhu Murthy, National Conference on Factory Automation, Robotics and Soft Computing (FARSC-07), 2007
• Design and Experimental Investigation of Air Lift Pump By Srinivasa Rao, S. Srinivasa Rao and K. Madhu Murthy, Proceedings of 51st Congress of ISTAM, 2006
• Investigations on flame spread in swirl generated recirculation zone with secondary air in a conical combustion chamber for gas turbine application By Madhu Murthy, National Conference on Advancements & Futuristic Trends in Mechanical & Materials Engineering (AFTMME'06), 2006
• Science, Technology and Industry By Madhu Murthy, An invited paper for the Andhra Pradesh State level Science Fare , 1993
• Imparting Entrepreneurial Skills through Curriculum By Madhu Murthy, C.R.K. Prasad and VV Reddy, National Conference on Reforms in Engineering Education, 1992
• Programmes for skill-development of entrepreneurs -an appraisal By Madhu Murthy, ‘Self-employment in Warangal District -Problems and Prospects’ organised by APSTEP, 1991
• Entrepreneurship in Engineering Education By Madhu Murthy, Revamping of Technical Education, SGGS College of Engineering and Technology, 1991
• Role of Academic Institutions in Promoting Entrepreneurship By Madhu Murthy, Proceedings of the Seminar on ‘Role and Responsibilities of Technical Educational Institutions in Innovation and Entrepreneurship, 1990
• Energy Conservation in Cement Industry By Madhu Murthy, Energy Conservation in Chemical Industry, 1985
• Flame studies in swirl generated recirculation zone with secondary air within a conical duct By Madhu Murthy, P. Ram Mohan and C.M. Vara Prasad, National Conference on ‘Fluid Mechanics and Fluid Power', 1983
• Effect of Secondary air on swirl generated recirculation zone of a conical combustion chamber for gas turbine application By Madhu Murthy, P. Ram Mohan and C.M. Vara Prasad, National Conference on ‘Combustion and Gas Turbines’, College of Engineering, 1983

×

Previous Students

---