All ResearchIDs

All Publications

Journal(s)

• Synthesis and mechanical properties of graphene nanoparticles reinforced with aluminium alloy matrix composites, By Ch Polayya, C. S. P. Rao, G. B. Veeresh Kumar & Raviteja Surakasi , SPRINGERS, Nanotechnology for Environmental Engineering, vol.8, pp.469-480, 2023
• A novel gelcast SiO2-Si3N4-BN ceramic composites for radome applications, By Kishore Kumar Kandi· Gurabvaiah Punugupati · Madhukar Pagidi C. S. P. Rao, SPRINGERS, SILICON, vol.14, pp.8179-8192, 2022
• A novel computative strategic planning projections algorithm (CSPPA) to generate oblique directional interference matrix for different applications in computer-aided design. , By Prasad, V.V., Hymavathi, M., Rao, C.S.P. and Bahubalendruni, M.A.R, ELSEVIER, Computers in Industry, vol.141, pp.103703, 2022
• Microstructure modeling of a sintered Al–4Si–0.6 Mg alloy extruded at semi-solid temperature ranges., By Nithin, Abeyram M., M. Joseph Davidson, and Chilakalapalli Surya Prakash Rao, SAGE , Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol.236 ISSUE 2, pp.394-403, 2022
• Effect of Boron Nitride (BN) on Mechanical and Dielectric Properties of Fused Silica Ceramic, By KK Kandi, G Punugupati, P Madhukar, CSP Rao, SPRINGERS, Composites Journal of the Korean Ceramic Society, vol.59, pp.565-577, 2022
• Influence of cutting parameters on laser assisted machining of C103 Nb alloy, By Aravind Sankeerth K, Pagidi Madhukar, Gurabvaiah Punugupati, Veeresh Kumar G B and C.S.P. Rao, scopus, ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, vol.9 number 3, pp.1199-1209, 2022
• Semi Active Vibration Control Device for Secondary Suspension of a Railway Wagon to Improve Ride Comfort, By Ravi Kumar Tadepalli, C.S.P. Rao, K. Narayana Rao, Dva Rama Sastry, scientific.net, Advances in Science and Technology , vol.120, pp.127-138, 2022
• Bayesian Optimization LSTM/bi-LSTM Network With Self-Optimized Structure and Hyperparameters for Remaining Useful Life Estimation of Lathe Spindle Unit , By Nikhil M. Thoppil, V. Vasu, C. S. P. Rao, ASME, J. Comput. Inf. Sci. Eng, vol.22, pp.1161, 2021
• Effect of TiCnp on microstructure and mechanical behaviour of high-performance Al7150-TiC nanocomposites, By Pagidi Madhukar a,, N. Selvaraj a, G.B. Veeresh Kumar b, C.S.P. Rao c, Faruq Mohammad d , Murthy Chavali e,, ELSEVIER, MATERIAL SCIENCE AND ENGINEER B, vol.265, pp.115034, 2021
• An Integrated Learning Algorithm for Vibration Feature Selection and Remaining Useful life Estimation of Lathe Spindle Unit, By Nikhil M. Thoppil . V. Vasu . C. S. P. Rao, SPRINGERS, Journal of Failure Analysis and Prevention, vol.22, pp.1693–1701, 2021
• Topology optimization of lattice structure on a brake pedal, By Arun J. Kulangara (Arun) , C.S.P. Rao b, Jose Cherian, ELSEVIER, Materials Today: Proceedings, vol.47, pp.5334-5337, 2021
• Health indicator construction and remaining useful life estimation for mechanical systems using vibration signal prognostics, By Thoppil, N.M., Vasu, V. & Rao, C.S.P., scopus, Int J Syst Assur Eng Manag, vol.12, pp.1001–1010 , 2021
• Experimental Studies of Resin Systems for Ablative Thermal Protection System, By Mishra, Jai Krishna, C. S. P. Rao, P. S. C. Bose, N. Kishore Nath, and G. Rama Rao, DESIDOC1, Defence Science Journal, vol.71, pp. 289-295, 2021
• Influence of TiC Nano-Particulates on the Physical and Mechanical Properties of AA7150 -TiC MMC: Fabricated by Advanced Novel Process, By Pagidi Madhukar, Selvaraj, N., Rao, C.S.P., Veeresh Kumar, G.B., Faruq Mohammad, R Seetharam, Murthy Chavali,, scopus, NanoSelect,, vol.1, pp.1-13, 2021
• A comprehensive investigation on machining of composites by EDM for microfeatures and surface integrity, By Gudipudi, Suresh, Selvaraj Nagamuthu, Kanmani Subbu Subbian, and Surya Prakasa Rao Chilakalapall, Sage Journals Home, Journal of Micromanufacturing, vol.5 ISSUE1, pp.: 25165984211063308., 2021
• Prediction of cutting force of AISI 304 stainless steel during laser-assisted turning process using ANFIS, By Naresh, C., P. Subhash Chandra Bose, C. Suryaprakash Rao, and N. Selvaraj, ELSEVIER, " Materials Today-Proceedings, vol.18, pp.2366-2371, 2021
• Deep Learning Algorithms for Machinery Health Prognostics Using Time-Series Data: A Review, By Nikhil M. Thoppil, V. Vasu & C. S. P. Rao , ELSEVIER, Journal of Vibration Engineering & Technologies, vol.9, pp.1123–1145, , 2021
• An Extensive Study of Multi-level Inventory Lot Sizing Optimization Problem., By VVD Sahithi, CSP Rao, M Srinivasa Rao, ELSEVIER, Advances in Applied Mechanical Engineering, vol., pp.1195–1205, 2020
• Enhanced Performance of AA7150-SiC Nanocomposites Synthesized by Novel Fabrication Process, By Pagidi Madhukar, N Selvaraj, G B Veeresh Kumar, C S P Rao, ELSEVIER, Ceramic International, vol.46, pp. 17103-17111, 2020
• Mechanical and Metallurgical Studies on Thixoextruded Al-Si Alloys., By Nithin, Abeyram M., M. J. Davidson, and C. S. P. Rao, SPRINGERS, Journal of Materials Engineering and Performance, vol.29, pp.6378- 6389, 2020
• Effect of Process Parameters on Volume and Geometrical Features of Electric Discharge Machined Channels on a Cast AA6061-B 4 C Composite, By Gudipudi, Suresh, Selvaraj Nagamuthu, Taraka Sarath Chandra Dongari, Kanmani Subbu Subbian, and Surya Prakasa Rao Chilakalapalli., SPRINGERS, In Advances in Materials Processing, vol., pp.243-255, 2020
• Enhanced mechanical properties of AA6061-B4C composites developed by a novel ultra-sonic assisted stir casting, By Gudipudi, Suresh, Selvaraj Nagamuthu, Kanmani Subbu Subbian, and Surya Prakasa Rao Chilakalapalli, an International Journal, Engineering Science and Technology, , vol.5, pp.: 1233-1243., 2020
• On the Criticality Analysis of Computer Numerical Control Lathe Subsystems for Predictive Maintenance, By Thoppil, N.M., Vasu, V. & Rao, C.S.P, SPRINGERS, Arabian Journal for Science and Engineering, vol.45, pp.5259–5271, 2020
• Artificial neural networks and adaptive neuro-fuzzy models for predicting WEDM machining responses of Nitinol alloycomparative study, By Naresh, C., Bose, P.S.C. and Rao, C.S.P, SPRINGERS, SN Applied Sciences,, vol.2, pp.314, 2020
• ANFIS based predictive model for wire edm responses involving material removal rate and surface roughness of Nitinol alloy, By Naresh, C., P. S. C. Bose, and C. S. P. Rao., ELSEVIER, Materials Today: Proceedings, vol.33, pp.93-101, 2020
• FEA-Based Electrothermal Modeling of a Die-Sinker Electro Discharge Machining (EDM) of an Aluminum Alloy AA6061, By Suresh Gudipudi, Vipul Kumar Patel, N. Selvaraj, S. Kanmani Subbu & C. S. P. Rao , SPRINGERS, Numerical Optimization in Engineering and Sciences, vol.979, pp.489-500, 2020
• Response Surface Modeling and Optimization of Gelcast Fused Silica Micro Hybrid Ceramic Composites, By Gurabvaiah Punugupati, P. S. C. Bose, G. Raghavendra & C. S. P. Rao , SPRINGERS, SILICON, vol.12, pp.1513–1528, 2020
• Fabrication and Characterization Two Step Stir Casting with Ultrasonic Assisted Novel AA7150-hBN Nanocomposites, By Pagidi Madhukar, N Selvaraj, C S P Rao, G B Veereshkumar, ELSEVIER, Alloys and Compound, vol. 815, pp. 152464, 2019
• Fabrication of Light Weight Metal Matrix Nanocomposites using Ultrasonic Cavitation Process::A State of Review, By Pagidi Madhukar, N Selvaraj, C S P Rao, S K Mishra, Gurabvaiah Punugupati, ELSEVIER, Materials Science Forum, vol.969, pp.882-888, 2019
• Production of high performance AA7150-1% SiC nanocomposite by novel fabrication process of ultrasonication assisted stir casting, By Pagidi Madhukar, Selvaraj, N., Raghavendra Gujjala, Chilakalapalli Surya Prakasa Rao, ELSEVIER, Ultrasonics - Sonochemistry, vol.58, , pp.104665, 2019
• Reliability Estimation of Reaction Control System of a Flight Vehicle Using Bayesian Networks with Multilevel Data, By Kumar, S. Muthu, P. Subhash Chandra Bose, R. A. Srivardhan, and C. S. P. Rao, SPRINGERS, Safety and Hazard Assessment for Risk-Based Technologies, vol.1, pp.697–706, 2019
• Failure Mode Identification and Prioritization Using FMECA: A Study on Computer Numerical Control Lathe for Predictive Maintenance, By Nikhil M. Thoppil, V. Vasu & C. S. P. Rao , SPRINGERS, Journal of Failure Analysis and Prevention , vol.19, pp.1153–1157, , 2019
• Book Mechanical Engineering for Sustainable Development: State-of-the-Art Research, By C.S.P. Rao, G.Amba Prasad Rao, N. Selvaraj, P.S.C. Bose, V.P. Chandramohan, TAYLOR FRANSIS , . Apple Academic Press,, vol., pp.672, 2019
• Fabrication and parametric optimization of SiO2-BN gelcast ceramic composites using response surface methodology, By Kandi, Kishore Kumar, Nagaveni Thallapalli, Mechiri Sandeep Kumar, and C. S. P. Rao, ELSEVIER, Materials Today: Proceedings , vol.18, pp.2298–2307 , 2019
• Effect of Machining Variables on Cutting Temperature While Rotary Milling of Inconel 625, By Gopala Rao Thellaputta, P. S. C. Bose, C. S. P. Rao & C. S. Raju , SPRINGERS, Recent Advances in Material Sciences, vol., pp.27-36, 2019
• Optimization of Process Parameters on Performance Measures of Wire Electrical Discharge Machining on Niobium C-103 Using Taguchi Method, By Naresh, C., Kavindra Pant, P. S. C. Bose, and C. S. P. Rao, SPRINGERS, In Recent Advances in Material Sciences, vol., pp. 409-423, 2019
• Erosion Behavior of Gelcast Fused Silica Ceramic Composites, By Punugupati, Gurabvaiah, P. S. C. Bose, G. Raghavendra, C. S. P. Rao, and S. Ojha., SPRINGERS, Silicon, vol.12, pp.:903–911, 2019
• Effect of tungsten carbide reinforcement on the aluminum 6061 alloy, By Kumar, GB Veeresh, R. Pramod, PS Shivakumar Gouda, and C. S. P. Rao, ASME, Journal of Testing and Evaluation, vol.47, pp. 2613- 2629, 2019
• Artificial Neural Network Prediction On Wear Of Al6061 Alloy Metal Matrix Composites Reinforced With-Al2O3, By Kumar, GB Veeresh, R. Pramod, C. S. P. Rao, and PS Shivakumar Gouda, ELSEVIER, " Materials Today: Proceedings , vol.5, pp. 11268-11276., 2019
• Adaptive neuro fuzzy model development for prediction of cutting forces in milling with rotary tools." , By Thellaputta, Gopala Rao, C. S. Raju, P. S. C. Bose, and C. S. P. Rao, ELSEVIER, Materials Today: Proceedings , vol.5, pp.7429-7436, 2019
• Modeling and optimization of wear characteristics of gelcast fused silica ceramic composites using RSM, By Punugupati, Gurabvaiah, Kishore Kumar Kandi, P. S. C. Bose, and C. S. P. Rao, ELSEVIER, Materials Today: Proceedings, vol.5, pp.6946-6953., 2019
• Tribological behavior of ultrasonic assisted double stir casted novel nano-composite material (AA7150-hBN) using Taguchi technique. , By Pagidi Madhukar, Selvaraj, N., Rao, C.S.P., Veeresh Kumar, G.B., ELSEVIER, Composites Part B: Engineering, vol.175, pp.107-136, 2019
• Microstructure studies of AA7150-hBN nanocomposites fabricated by ultrasonic assisted stir casting, By Pagidi Madhukar, N Selvaraj, Gurabvaiah Punugupati, Veeresh Kumar GB, C S P Rao, S K Mishra, , ELSEVER, iopscience, vol.6, pp.11, 2019
• A study on geometrical features of electric discharge machined channels on AA6061-4%B4C composites, By Suresh Gudipudi , N Selvara, DTS Chandra,S Kanmani Subbu and CSP Rao, SAGE, MEASUREMENTS AND CONTROL, vol.53, pp.358-377, 2019
• Influence of Solid Loading and Ratio of Monomers on Mechanical and Dielectric Properties of Hybrid Ceramic Composites, By Punugupati, Gurabvaiah, P. S. C. Bose, G. Raghavendra, and C. S. P. Rao. , SPRINGERS, Silicon, vol.6, pp. 2701-2710, 2019
• Optimisation of WEDM parameters on Nitinol alloy using RSM and desirability approach, By Chakala, Naresh, P. Subhash Chandrabose, and C. S. P. Rao, TAYLOR FRANSIS , Australian Journal of Mechanical Engineering , vol.19, pp.582-594, 2019
• Characterization of glass fiber bituminous coal tar reinforced Polymer Matrix Composites for high performance applications, By G.B. Veeresh Kumar , R. Mageshvar , R. Rejath , S. Karthik , R.Pramod , C.S.P. Rao , ELSEVIER, Composites Part B: Engineering, vol.175, pp. 107156, 2019
• Assessment of mechanical and tribological characteristics of Silicon Nitride reinforced aluminum metal matrix composites., By G.B.Veeresh Kumar a,, Pinaki Prasad Panigrahy , Nithika Suresh, Pramod R , C.S.P. Rao , ELSEVIER, composites-part-b-engineering, vol.175, pp.107138, 2019
• Generation and optimization of lattice structure on a spur gear, By Kulangara, Arun J., C. S. P. Rao, and P. Subhash Chandra Bose., ELSEVIER, Materials Today: Proceedings , vol.5, pp.: 5068-5073., 2018
• Fabrication and characterization of AA6082 ZTA composites by powder metallurgy process., By Jeevan, V., C. S. P. Rao, N. Selvaraj, and G. Bhaskar Rao, ELSEVIER, Materials Today: Proceedings , vol.5, pp.254-260., 2018
• ”Organ Printing With Life Cells: A Review, By SK Malyala, YR Kumar, CSP Rao, ELSEVIER, Materials Today: Proceedings , vol.4, pp.1074-1083, 2017
• Artificial Neural Networks for the Prediction of Wear Properties of Al6061-TiO2 Composites, By G B Veeresh Kumar, R Pramod, P S Shivakumar Gouda, C S P Rao, IOP Conf. Series, IOP Conference Series: Materials Science and Engineering, vol.225, pp. 012046 , 2017
• SYNTHESIS AND CHARACTERIZATION OF TiO2 REINFORCED Al6061 COMPOSITES, By G B Veeresh Kumar, P S Shivakumar Gouda , R Pramod , C S P Rao3, SAGE, Advanced Composites Letter, vol.26, pp.18-23, 2017
• An evolutionary approach for modeling and optimization of gelcasting of ceramics, By Thoppil, N.M., Kishore Kumar Kandi, N Selvaraj, C S P Rao, scopus, ICAAMM, vol.4, pp.8296–8306., 2017
• “Optimization of Machining Parameters for surface roughness on turning of Niobium alloy C-103 by using RSM, By KS Rao, CSP Rao, PSC Bose, BB Rao, A Ali, K KIshore Kumar, ELSEVIER, Materials Today: Proceedings , vol.4, pp. 2248-2254, 2017
• ” Modeling of Process Parameters of Gelcast Fused Silica Ceramics using Response Surface Methodology, By KK Kandi, CSP Rao,, ELSEVIER, Materials Today: Proceedings , vol.4, pp.1708-1715, 2017
• “Machinability of Nickel Based Superalloys: A Review”, By GR Thellaputta, PS Chandra, CSP Rao, ELSEVIER, Materials Today: Proceedings , vol.4, pp. 3712-3721, 2017
• “Process modeling of gelcast Si3N4 ceramics using multi gene genetic programming, By Gurabvaiah Punugupati, Kishore Kumar Kandi, PSC Bose, CSP Rao, ELSEVIER, Materials Today: Proceedings, vol.4, pp. 1900-1909, 2017
• An invasive weed optimization approach for job shop scheduling problems, By SK Mishra, PSC Bose, CSP Rao, SPRINGERS, The International Journal of Advanced Manufacturing Technology, vol.19, pp.4233–4241., 2017
• A hybrid binary particle swarm optimization for large capacitated multi item multi level lot sizing problems, By SK Mishra and C.S.P. Rao, IOP Conf. Series, IOP Conference Series: Materials Science and Engineering, vol.149, pp.012040, 2016
• Effect of Monomers Content and their Ratio on Gelcasting of Fused Silica Ceramics, By Kishore Kumar Kandi, Gurabvaiah Punugupati and Surya Prakash Rao Chilakalapalli,, TAYLOR FRANSIS , Transactions of the Indian Ceramic Society, vol.75, pp.185-188 , 2016
• Effect of Dispersant on the Rheological Properties of Gelcast Fused Silica Ceramics, By Kishore Kumar Kandi, Sumit Kumar Pal and C S P Rao, IOP Conf. Series, IOP Conference Series: Materials Science and Engineering, vol.149, pp. 012063, 2016
• Laser assisted machining: a state of art review, By Gurabvaiah Punugupati, Kishore Kumar Kandi, P. S. C. Bose and C. S. P. Rao, IOP Conf. Series, IOP Conference Series: Materials Science and Engineering, vol.149, pp.012014, 2016
• Performance comparision of some evolutionary algorithms on job shop scheduling problems, By SK Mishra and C.S.P. Rao, IOP Conf. Series, IOP Conference Series: Materials Science and Engineering, vol.149, pp.012041, 2016
• Manufacturing of aluminium nano hybrid composites: a state of review, By P Madhukar, N Selvaraj and C S P Rao, IOP Conf. Series, IOP Conference Series: Materials Science and Engineering, vol.149, pp. 012114, 2016
• Shape memory alloys: a state of art review, By C Naresh, P S C Bose, C S P Rao, IOP Conf. Series, IOP Conference Series: Materials Science and Engineering, vol.149, pp. 012054, 2016
• Preparation of SiC based Aluminium metal matrix nano composites by high intensity ultrasonic cavitation process and evaluation of mechanical and tribological properties, By N V Murthy, A Prasad Reddy, N Selvaraj, C S P Rao, IOP Conf. Series, IOP Conference Series: Materials Science and Engineering, vol.149, pp.012106, 2016
• “Preparation and Characterization of Si3N4-BN Ceramic Composites by Gelcasting, By Nagaveni Thallapalli, K. Kishore Kumar and C.S.P. Rao, IOP Conf. Series, Material Science Research India, vol.1, pp. 28-33, 2016
• Development of Silicon Nitride-Based Ceramic Radomes – A Review, By Kishore Kumar Kandi, Nagaveni Thallapalli, and C.S.P. Rao, International Journal of Applied Ceramic Technology publishes, Int. J. Appl. Ceram. Technol., vol.12, pp.909–920 , 2015
• Optimization of Machining Parameters for surface roughness on turning of Niobium alloy C-103 by using RSM, By K. Someswara Rao, C.S.P.Rao, P.S.C.Bose, ISSN, International Journal on Theoretical and Applied Research in Mechanical Engineering, vol.4 , pp.2248-2254, 2015
• Use Of Ann And Rsm To Model, Predict And Optimize The Performance Parameters For Turning Waspaloy, By Kishore Jawale, Dr. P Subhash Chandra Bose, Prof. C S P Rao, RESEARCH GATE, nternational Journal of Advanced Engineering Research and Studies, vol.4, pp.11-17, 2015
• Implementation of Genetic Algorithm to Optimize the Assembly Sequence Plan based on Penalty function, By Arun Tom Mathew and C. S. P. Rao, RESEARCH GATE, ARPN Journal of Engineering and Applied Sciences, vol.9, pp.453-456, 2014
• Optimization of Cutting parameters for cutting force on Turning of Niobium alloy using Response Surface Methodology, By K. Someswara Rao, P. Subhash Chandra Bose, C.S.P. Rao, IJISET , Engineering & Technology, vol.1, pp.2348 – 7968, 2014
• Experimental Investigations and Development of cutting force model for Self Propelled Rotary Face Milling Cutter in Machining of Titanium Alloy, By J. John Rozario Jegaraj, C.S. Raju, K. Ramesh Kumar, C.S.P. Rao, RESEARCH GATE, Part B: Journal of Engineering Manufacture, vol.228, pp.1081-1089, 2014
• Optimal Buffer Allocation in Tandem Closed Queuing Network with Single Server using PSO, By K.L. Narasimhamu, V. Venugopal Reddy, C.S.P. Rao, ELSEVIER, Procedia Materials Science, vol.5, pp.2084-2089, 2014
• Optimization of Buffer Allocation In Tandem Closed Queuing Network Using Symbiotic Organisms Search, By K.L. Narasimhamu, V. Venugopal Reddy, C.S.P. Rao, research gate, research gate, vol.10, pp.12671-12682, 2014
• “Improved Music Based Harmony Search (IMBHS) For Solving Job Shop Scheduling Problems (JSSPS), By Hymavathi Madivada and C.S.P. Rao, IJPLA , International Journal of Programming Languages and Applications, vol.3, pp.1-15, 2013
• Evaluation of Optimum Cutting Parameters In Turning of NIMONIC 75 using RSM, By P Subhash, Chandra Bose and C S P Rao, RESEARCH GATE, International Journal on Theoretical and Applied Research in Mechanical Engineering, vol.2, pp.17-30, 2013
• “Development and Analysis of Transportation model in Public Distribution System (PDS) for Warangal district, By S. Srinivas, N. Selvaraj and C.S.P. Rao, IJMST, International Journal for Management Science and Technology, vol.1, pp.2, 2013
• “Studies on mechanical and dry sliding wear of Al6061–SiC composites, By G.B. Veeresh Kumar, C.S.P. Rao, N. Selvaraj, ELSEVIER, Composites Part B: Engineering, vol.43, pp. 1185-1191, 2012
• Development of an Online Inventory Lot-sizing Integrated with Supplier Selection System for a multi-product manufacturing Industry, By L.Siva Rama Krishna, Sandeep Dulluri, G.Rangajanardhan and C. S. P. Rao, Mathematical and Computer Modelling of Dynamical Systems , ”, International Journal of Applied Management and Technology, vol.18, pp.273-286, 2012
• A Review on Non Traditional Algorithms for Job Shop scheduling, By Hymavathi Madivada and C.S.P. Rao, IAEME publication, International Journal of Programming Languages and Applications , vol.3, pp.1-15, 2012
• “An Invasive weed optimization (Approach) for multi objective Job Shop Scheduling Problems, By Hymavathi Madivada and C.S.P. Rao,, RESEARCH GATE, International Journal of Mechanical Engineering and Technology, vol.3, pp.627-637, 2012
• Mechanical and dry sliding wear behaviors of Al7075 alloy-reinforced with SiC particles, By G.B. Veeresh Kumar, C.S.P. Rao and N. Selvaraj, SAGE, Journal of Composite Materials, vol.46, pp.1201-1209, 2011
• Theoretical Analysis on Powers of-two Applied to JSP – A Case Study of Turbine Manufacturing, By V. Mahesh, C.S.P. Rao, IGI GLOBAL PUBLICATIONS, , International Journal of Green Computing, vol.2, pp.1-20, 2011
• Simultaneous scheduling of machines and vehicles in an FMS environment with alternative routing, By M. V. Satish Kumar & Ranga Janardhana & C. S. P. Rao, SPRINGERS, The International Journal of Advanced Manufacturing Technology , vol.53, pp.339–351, 2011
• Mechanical and Tribological Behavior of Particulate Reinforced Aluminium Metal Matrix Composites – a review, By G.B. Veeresh Kumar, C.S.P. Rao and N. Selvaraj, RESEARCH GATE, Journal of Minerals & Materials Characterization & Engineering, , vol.10, pp.59-91, 2011
• Synthesis and Property Evaluation of Al7075-Al2O3 Composite, By G.B. Veeresh Kumar, C.S.P. Rao and N. Selvaraj, I- SCHOLARS, International Conference on Smart Technologies for Materials, Communication, Controls, Computing and Energy, vol.3, pp. 199–206., 2011
• “Studies on Al6061-SiC and Al7075-Al2O3 Metal Matrix Composites, By G. B. Veeresh Kuma, C. S. P. Rao, N. Selvaraj, M. S. Bhagyashekar, JMMCE, Journal of Minerals & Materials Characterization & Engineering, vol.9, pp.43-55, 2010
• Studies on Al6061-SiC and Al7075- Al2O3 Metal Matrix Composites, By G. B. Veeresh Kumar, C. S. P. Rao, N. Selvaraj, M. S. Bhagyashekar, jmmce.org, Journal of Minerals & Materials Characterization & Engineering, vol.9, pp.43-55, 2010
• Design of Hybrid Particle Swarm Optimization Algorithm for solving Job Shop Scheduling Problem, By M. Hymavathi, S K Mishra, CSP Rao, IJAMT, International Journal of Applied Management and Technology, vol.5, pp.1-15, 2010
• Implementation of an online scheduling support system in a high mix manufacturing firm, By L.Siva Rama Krishna, V Mahesh, Sandeep Dulluri, and C. S. P. Rao, , AJOL, https://www.ajol.info/index.php/ijest, vol.2, pp.90-103, 2010
• Effect of SiC Reinforcement in Al6061 Alloy, By CSP RAO, IJ-ETA-ETS, International Journal of Emerging Technologies and Applications in Engineering, Technology and Sciences, vol.3, pp., 2010
• A CAD System for Extraction of Mating Features in an Assembly, By Arun Mathew, C.S.P. Rao, Emerald logo, Assembly Automation, vol.30, pp.142-146, 2010
• A Novel Method of using API to Generate Liaison Relationships from an Assembly, By Arun Tom Mathew , C. S. P. Rao, SCIENTIFIC RESEARCH, J. Software Engineering & Applications, vol.3, pp.167-175, 2010
• Prediction of Wear of Al6061-SiC Metal Matrix Composites using Artificial Neural Networks, By C.S.P.RAO, IJ-CA-ETS, International Journal of Computer Applications in Engineering, Technology and Sciences, vol.2, pp.498-505, 2010
• Optimization of Cam-Follower Motions using B-Splines, By N. Sateesh , C. S.P. Rao & T. A. Janardhan Reddy, TAYLOR FRANSIS , International Journal of Computer Integrated Manufacturing , vol.226, pp.515-523 , 2009
• Experimental Studies on Physical and Wear Behavior of Al6061-SiC Composites, By G.B. VEERESH KUMAR, C.S.P. RAO,N. SELVARAJ and K.M.NAGENDRA PRASAD, Material Science Research India, An International Research Journal of Material Sciences, vol.6, pp.531-536, 2009
• Algorithms for the design feature data extraction from DXF files, By P. Srikanth, C.S.P. Rao and G. Ranga Janardhan, Research India Publications, GALE ACADEMIC ONEFILE, vol.4, pp. 1185-1195, 2009
• Application of ant colony, genetic algorithm and data mining-based techniques for scheduling, By Surendra Kumar , C.S.P. Rao, ELSEVIER, Robotics and Computer-Integrated Manufacturing, vol.25, pp.901–908, 2009
• A New CAD Schema for Assembly Sequence Planning, By ARUN TOM MATHEW , CSP RAO, RESEARCH GATE, International Journal on Design and Manufacturing Technologies, vol.3, pp.43-47, 2009
• Integration of Feature recognition and Process Planning using VRML and Petri Nets, By D. Sreeramulu , C.S.P.Rao, De Gruyter, International journal for manufacturing science and production, vol.10, pp.75- 90., 2009
• A real time web integrated scheduling support system for a multi product manufacturing industry, By C.S.P RAO, IJCIM, International Journal of the computer, the Internet and management, vol.17, pp.55-68, 2009
• A novel approach for extraction of design features using DXF files, By P. Srikanth,C.S.P Rao, G.RangaJanardhan, iJAMT, The International Journal of Applied Management and Technology, vol.7, pp.122-130, 2009
• Parametric Modelling and Simulation of Rapid Prototyping, By Y. Ravi Kumar ,C. S. P. RaoT. A. Janardhan Reddy, RESEARCH GATE, International Journal of Manufacturing Technology and Management, vol.1, pp.65-87, 2009
• A heuristic for priority based scheduling in a turbine manufacturing job-shop, By Sandeep Dulluri ,V. Mahesh ,C. S. P. Rao, RESEARCH GATE, International Journal of Industrial and Systems Engineering, vol.3, pp.: 625 – 643, 2008
• A Robust Process Optimization for Fused Deposition Modeling, By Y. Ravi Kumar, C.S.P. Rao and T.A. Janardhan Reddy, INDERSCIENCE ONLINE, International Journal of Manufacturing Technology and Management, vol.14, pp.228-245, 2008
• A Genetic Algorithm Approach for Simultaneous Tolerance Synthesis for Manufacturing and Quality with Different Stack-Up Conditions, By Y.S. Rao and C.S.P. Rao, GALEACADEMY ONLINE, International Journal of Applied Engineering, vol.3, pp.1169–1188, 2008
• Recognition of Machining Features and Optimum Process Plan Generation using Genetic Algorithms, By D. Sreeramulu, and C.S.P. Rao,, De Gruyter , the journal Journal for Manufacturing Science and Production, vol.10, pp.145-159, 2008
• Machining Feature Recognition and Process Plan Generation for Prismatic Parts, By D. Sreeramulu, and C.S.P. Rao,, IJSC, International Journal of Scientific Computing, vol.2, pp.129-143., 2008
• Optimization of cam-follower motion using B-splines, By N. Sateesh , C. S.P. Rao & T. A. Janardhan Reddy, TAYLOR FRANSIS , International Journal of Computer Integrated Manufacturing, vol.22, pp.515-523,, 2008
• Consignment stock policy using Genetic Algorithm for effective inventory management in supply chains, By Ch Srinivas ,C.S.P. Rao,Y.V. Rao, RESEARCH GATE, International Journal of Services Operations and Informatic, vol.3, pp.107- 126., 2008
• A robust process optimization for fused deposition modeling, By Y. Ravi Kumar, C.S.P. Rao and T.A. Janardhan Reddy, INDERSCIENCE ONLINE, International Journal of Manufacturing Technology and Management, vol.14, pp.228-245, 2008
• Consignment stock policy with controllable lead times for effective I inventory management in supply chains, By Ch Srinivas ,C. S. P. Rao, RESEARCH GATE, International Journal of Manufacturing Technology and Management, vol.10, pp.161-176, 2007
• Optimization of supply chains for single vendor-multi buyer consignment stock policy under controllable lead time using genetic algorithm, By Chidurala Srinivas & C. S. P. Rao , SPRINGERS, International Journal of Manufacturing Research, vol.48, pp.407–420, 2007
• Cell formation and performance evaluation of cellular layouts using GGA and simulation, By CSP RAO, International Journal of Factory Automation, Robotics and Soft Computing, vol.1, pp.21-27, 2007
• A hybrid Grouping Genetic Algorithms for cell formation with alternative Part routings and Multiple Machines, By C.S.P.RAO, IJMST, International Journal for Manufacturing Science and Technology, vol.9, pp.119, 2007
• Grouping Genetic Algorithm for cell formation problem, By C.S.P RAO, IJMST, International Journal for Manufacturing Science and TechnologY, vol.9, pp.11-20, 2007
• Multi Objective Optimization for Job Shop Scheduling using Sheep Flocks Heredity Model Algorithm, By M Chandrasekaran, P Asokan, S Kumanan, S Umamaheswari, CSP Rao, IJMST, International Journal of Manufacturing Science and Technology,, vol.9, pp.47-63, 2007
• A Hybrid Multi Objective GA for Simultaneous Scheduling of Machines and AGVs in FMS, By B. S. P. Reddy & C. S. P. Rao, SPRINGERS, The International Journal of Advanced Manufacturing Technology, vol.31, pp.602–613, 2006
• A Modified GA Approach for Simultaneous Scheduling of Machines and AGVs in FMS, By BSP Reddy, CSP Rao, IJMST, International Journal for Manufacturing Science and Technology, vol.8, pp.59-68, 2006
• An Optimization – Simulation Approach for Performance Evaluation of Cellular Layout, By K Eswaraiah, CSP Rao, ACM DIGITAL, WSEAS Transactions on Business and Economics,, vol., pp.185–190, 2005
• Design optimization and manufacturing of plate cams using Nurbs, By K Eswaraiah, CSP Rao, IJMST, International Journal for Manufacturing Science and Technology, vol.8, pp.45-58,, 2005
• Simulation Modeling and Performance Evaluation of AGV based Material Handling System, By Reddy, B. S. P. &, C. S. P Rao, Transactions on Business and Economic, WSEAS, vol.2, pp.30-36, 2005
• Simulation of machine breakdown in a pull production system operated by various control mechanisms-Modeling and simulation, By N. Selvaraj,C. S. P. Rao,T. A. Janardhan Reddy , IASTED publication ACTA Press, research gate, vol.4, pp.88986-391, 2004

Conference(s)

• CAD/CAM Solutions for gouge free and efficient 5-Axis Machining of Hydro Turbine Component – Francis Runner Blade By CSP RAO, ISME , 2017
• Modeling and Optimization of process parameters of Gelcast Silicon Nitride ceramics using RSM By C S P RAO, ISME , 2017
• Experimental Investigation of turning parameters of GFRP Composite with PVD and CVD coated carbides By CSP RAO, ISME Conference, 2017
• 5-Axis Programming of turbine blade made easy – Customized module developed under UG NX environment By CSP RAO, ISME Conference, 2017
• “Ultrasonic Cavitation process for light weight metal matrix nanocomposite: A Review By CSP RAO, ISME Conference, 2017
• “Gelcasting of Si3N4-Sio2 ceramic composites and evaluation of their characteristics By CSP RAO, ISME Conference, 2017
• Modified gravitational search algorithm for optimization By CSP RAO, ISME Conference, 2017
• Effect of Dispersant on the Rheological Properties of Gelcast Fused Silica Ceramics By CSP RAO, IConAMMA, 2016
• Laser assisted machining: a state of art review By CSP RAO, IConAMMA, 2016
• A hybrid binary particle swarm optimization for large capacitated multi item multi level lot sizing problems By CSP RAO, IConAMMA, 2016
• “Performance comparision of some evolutionary algorithms on job shop scheduling problems By CSP RAO, IConAMMA, 2016
• Manufacturing of aluminium nano hybrid composites: a state of review By CH.SURYA PRAKASH RAO, Materials Science and Engineering, 2016

Text Book(s)

• Laser Assisted Machining of Gelcast Fused Silica Composites By CSP RAO (Published by: LAMBERT Academic Publications), PUBLISHED, 2021
• Modeling and Optimization of Gelcast Ceramic Composites By CSP RAO (Published by: ”, LAMBERT Academic Publications), PUBLISHED, 2021
• Experimental Investigations of Nano Particles Reinforced Al7150 MMCs By CSP RAO (Published by: LAMBERT Academic Publications), PUBLISHED, 2021
• A First Course on Engineering Drawing using AutoCAD By CSP RAO (Published by: SMS Publishing House – Hyderabad. ), PUBLISHED, 2014
• Production Technology By CSP RAO (Published by: Hitech Publishers ), PUBLISHED, 2008
• 10 Units on CAPP for IGNOU By CSP RAO (Published by: IGNOU Press – New Delhi), PUBLISHED, 2006
• 6 Units on CAD By CSP RAO (Published by: IGNOU Press – New Delhi), PUBLISHED, 2005
• A text book on CAD/CAM By CSP RAO (Published by: Hitech publishers – Hyderabad.), PUBLISHED, 2004

Educational Package(s)

• Computer Integrated Manufacturing By CSP RAO, 2010

Patent(s)

• Magnetic Actuated Micro-Swimmer Testing Apparatus for Performance Enhancement in Newtonian and Non-Newtonian Fluids (24/2022)
• Smart system and method for Automatic Exploded View Generation and Assembly Sequence Plan Optimization (13/2022)

Previous Students