Journal(s)
Influence of Helical-Wire-Coil Inserts on Swirl-Flow Generation and Heat Transfer Distribution in an Annular Channel,
By 1. M. S. Kumar, S. Abraham, ,
Taylor and Francis,
Heat Transfer Engineering,
vol.,
pp.,
2026
Experimental and numerical studies of detailed heat transfer and flow characteristics in the rib turbulated annulus of a double pipe heat exchanger,
By M. S. Kumar, S. Abraham,
Elsevier Inc.,
International Journal of Thermal Sciences,
vol.207,
pp.109382,
2025
Numerical Investigation and Multi Objective Optimization of Attached and Detached Inclined Ribs in an Annular Channel for Enhanced Heat Transfer,
By Mantri Sandeep Kumar, Kowluri Devi Sri Lakshmi Varaprasad, Kommareddy Rahul Reddy, Satyanand Abraham,
ASME,
ASME Journal of Thermal Science and Engineering Applications,
vol.,
pp.,
2025
Influence of pentagonal corrugated absorber sheet on heat transfer behavior of solar air collector: numerical analysis with optimized corrugation dimensions,
By Adavi Sai Sreeharsha, V. P. Chandramohan, Satyanand Abraham,,
Springer,
Journal of Thermal Analysis and Calorimetry,
vol.,
pp.,
2024
Flow and heat transfer characteristics in the entry and stabilized flow regions of a circular channel rotating about a parallel axis,
By S.A.Narayan, S. Abraham,
ASME,
Journal of Thermal Science and Engineering Applications,
vol.16,
pp.071011,
2024
Applications of pulsating heat pipe (PHP) as an efficient heat transfer device: a review of recent developments,
By M.S. Kumar, S. Abraham,
Springer,
Heat and Mass Transfer ,
vol.60,
pp.1285–1311,
2024
Thermal performance of a two-phase flat thermosyphon with surface wettability modifications,
By P. Dhanalakota, S. Abraham, B. Sammakia, A. Pattamatta,
Elsevier Inc.,
Applied Thermal Engineering,
vol.,
pp.,
2022
Thermal Characteristics of a Three-Dimensional Coil Type Pulsating Heat Pipe at Different Heating Modes,
By S. Abraham, A. Takawale, P. Stephan, A. Pattamatta,
ASME,
Journal of Thermal Science and Engineering Applications,
vol.,
pp.,
2021
Evaluation of candidate strategies for the estimation of local heat transfer coefficient from the wall jets,
By S. Godi, S. Abraham, A. Pattamatta, C. Balaji,
Taylor and Francis,
Experimental Heat Transfer,
vol.,
pp.,
2020
Heat transfer distribution on a cylindrical convex surface due to obliquely impinging row of circular jets,
By S. Abraham, R.P. Vedula,
Elsevier Inc.,
International Journal of Heat and Mass Tranfer,
vol.,
pp.,
2019
A comparative study of flow regimes and thermal performance between flat plate pulsating heat pipe and capillary tube pulsating heat pipe,
By A. Takawale, S. Abraham, A. Sielaff, P. S. Mahapatra, A. Pattamatta, P. Stephan,
Elsevier Inc.,
Applied Thermal Engineering,
vol.,
pp.,
2019
Experimental assessment of the thermo-hydraulic performance of automobile radiator with metallic and non-metallic nanofluids,
By A. R. Akash, S. Abraham, A. Pattamatta, S. K. Das,
Taylor and Francis,
Heat Transfer Engineering,
vol.,
pp.,
2019
Local effectiveness and Nusselt number distributions for a rectangular jet impinging on a cylindrical convex surface at different angles,
By S. Abraham, R.P. Vedula,
Elsevier Inc.,
International Journal of Thermal Sciences,
vol.,
pp.,
2018
Effectiveness distribution measurements for a row of heated circular jets impinging on a cylindrical convex surface at different inclinations,
By S. Abraham, R.P. Vedula,
Elsevier Inc.,
International Journal of Heat and Fluid Flow,
vol.,
pp.,
2018
Effectiveness and heat transfer characteristics for a single heated rectangular jet with different aspect ratios impinging perpendicularly on a flat surface,
By S. Abraham, R.P. Vedula,
Elsevier Inc.,
International Journal of Heat and Mass Transfer,
vol.,
pp.,
2016
Heat transfer and pressure drop measurements in a square cross-section converging channel with V and W rib turbulators,
By S. Abraham, R.P. Vedula,
Elsevier Inc.,
Experimental Thermal and Fluid Science,
vol.,
pp.,
2016
Conference(s)
Numerical Study of Local Heat Transfer in a Solar Air Heater with Staggered Rectangular Fin-Integrated in Rectangular Duct
By 1. G. Harish, S. Abraham,
International Conference on Thermal Sciences and Sustainable Energy (ICTSE 2026),
2026
Investigation of local flow and heat transfer characteristics in an annular region of a DPHE using perforated wire coil inserts
By Mantri Sandeep Kumar, Satyanand Abraham,
16th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows,
2025
Thermal Characteristics of a Phase Change Material (PCM) During Separate and Simultaneous Charging and Discharging in the Presence of Inclined Fins
By Amarendra Talagana, Tarun Sai Druga Mutyala, Satyanand Abraham,
ADVANCES IN THERMAL SYSTEMS, MATERIALS AND DESIGN ENGINEERING (ATSMDE – 2024),
2024
Heat transfer and flow characteristics in rectangular channel rotating about parallel axis
By S. A. Narayan, S. Abraham,
2nd International Conference on Energy Resources and Technologies for Sustainable Development ,
2023
Heat transfer and flow characteristics in square and filleted square channel rotating about parallel axis
By S. A. Narayan, S. Abraham,
27th National and 5th International ISHMT-AFTFE Heat and Mass Transfer Conference,
2023
Local heat transfer characteristics for annular flow with helical wire coil as turbulence promoters
By S. Mantri, S. Abraham,
27th National and 5th International ISHMT-AFTFE Heat and Mass Transfer Conference,
2023
Local heat transfer and fluid flow characteristics over cylinder in the presence of vortex generator acting as flow guides
By A. Lakshman , S. Mantri, S. Abraham,
9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP),
2022
Distribution of effectiveness and Nusselt number over a corrugated surface impinged by a row of circular jets
By S. Abraham, R.P. Vedula,
International Conference on Innovations in Mechanical Sciences (ICIMS'21),
2021
Numerical Studies on Novel Arrangement of Vortex Generators for Efficient Cooling of Vehicle Battery
By A. Lakshman, V. P. Reddy, S. Abraham,
48th National Conference on Fluid Mechanics and Fluid Power (FMFP),
2021
Thermal performance of coil type pulsating heat pipe with different heating modes
By A. Singh, S. Abraham, A. Takawale, A. Pattamatta,
National Conference on Critical Heat Flux and Multiphase Flow,
2018
Comparison of heat transfer performance of non-isothermal circular and rectangular jets impinging on a convex surface
By S. Abraham, R.P. Vedula,
7th International Conference & 45th National Conference on Fluid Mechanics and Fluid Power (FMFP-2018),
2018
A comparative study of flow regimes and thermal performance between flat plate pulsating heat pipe(FPPHP) and capillary tube pulsating heat pipe(CTPHP)
By A. Takawale, S. Abraham, A. Pattamatta, A. Sielaff, P. Stephan,
The 10th International Conference on Boiling and Condensation Heat Transfer (ICBCHT2018),
2018
Influence of orientation angle on heat transfer in orthogonally rotating square channel with V-ribs
By S. Abraham, N. Shinde, R.P. Vedula,
24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017),
2017
Convex surface heat transfer behaviour in the presence of obliquely impinging non-isothermal slot jets
By 1. S. Abraham, A.B. Kakade, R.P. Vedula,
The World Congress on Engineering 2015, WCE 2015,
2015
Book Chapter(s)
Heat transfer performance for an obliquely impinging slot jet on a convex surface
By S. Abraham, A.B. Kakade, R.P. Vedula in
Transactions on Engineering Technologies,
Springer Singapore,
Conference proceedings,
2016
Patent(s)
Roof Spoiler with Sinusoidal Aerofoil Turbulator (504917-001)
Last updated on July 31, 2026